PRM-434 - Monitor Postium - Free user manual and instructions
Find the device manual for free PRM-434 Postium in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Patient Monitor |
| Brand | Postium |
| Model | PRM-434 |
| Display Size | 10 inches |
| Display Type | Color LCD |
| Dimensions (W x H x D) | 300 x 200 x 100 mm |
| Weight | 2 kg |
| Power Supply | 100-240V AC, 50/60 Hz |
| Battery Backup | Yes, rechargeable Li-ion |
| Measured Parameters | ECG, SpO2, NIBP, Temperature, Respiration Rate |
| Alarm System | Visual and audible alarms |
| Data Storage | Up to 24 hours trending |
| Connectivity | RS232, USB, Ethernet (optional) |
| Cleaning | Wipe with a soft, dry cloth. Do not use harsh chemicals. |
| Safety Standards | IEC 60601-1 |
| Spare Parts Availability | Contact manufacturer or authorized dealers |
| User Manual Page Count | 24 pages |
Frequently Asked Questions - PRM-434 Postium
How do I turn on the Postium PRM-434 monitor?
Connect the power cord to the monitor and an electrical outlet, then press the power button located on the front panel. The screen will light up after a few seconds.
What parameters can the PRM-434 measure?
The monitor measures ECG, SpO2 (blood oxygen saturation), NIBP (non-invasive blood pressure), temperature, and respiration rate.
How do I set an alarm threshold?
Go to the 'Alarm Setup' menu by pressing the 'Alarm' button. Use the soft keys to select the parameter and adjust the high and low limits. Confirm to save.
Can I use the monitor on battery power?
Yes, the PRM-434 has a rechargeable lithium-ion battery that provides up to 2 hours of operation. The battery indicator shows the remaining charge.
How do I connect the SpO2 sensor?
Connect the SpO2 cable to the port labeled 'SpO2' on the monitor. Attach the sensor to the patient's finger, ensuring the sensor is clean and properly positioned.
What should I do if the monitor displays an error message?
Note the error code, then refer to the troubleshooting section in the user manual. Common errors include lead-off for ECG or low battery. If the issue persists, contact technical support.
How do I clean the monitor?
Turn off the device and disconnect from power. Wipe the surface with a soft, lint-free cloth slightly dampened with water or a mild detergent. Do not use abrasive cleaners or immerse the device.
Can I export patient data from the monitor?
Yes, you can export data via the USB port or RS232 interface. Insert a USB drive and select 'Export Data' from the menu. Data is saved in CSV format.
What replacement parts are available for the PRM-434?
Replacement parts include cables, sensors (SpO2, ECG, NIBP cuff), power adapter, and battery. Contact your supplier for genuine parts.
How do I update the software on the monitor?
Software updates are performed by authorized service personnel. Contact Postium support or your distributor for the latest firmware and update instructions.
User questions about PRM-434 Postium
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Monitor in PDF format for free! Find your manual PRM-434 - Postium and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. PRM-434 by Postium.
USER MANUAL PRM-434 Postium
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Postium
Model : PRM-434
Category : Monitor