ANTDA4161 - TV antenna Audix - Free user manual and instructions
Find the device manual for free ANTDA4161 Audix in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Indoor active TV antenna |
| Brand | Audix |
| Model | ANTDA4161 |
| Frequency Range | VHF 174-216 MHz, UHF 470-860 MHz |
| Gain | 25 dB (typical) |
| Impedance | 75 Ohm |
| Connector Type | F-type female |
| Power Supply | 5V DC via USB cable (included) |
| Cable Length | 1.5 meters (approx.) |
| Material | Plastic casing |
| Dimensions (H x W x D) | 200 x 150 x 50 mm |
| Weight | 150 g |
| Color | Black |
| Features | AGC, LTE filter, built-in amplifier |
| Installation | Plug and play: connect to TV and position antenna |
| Cleaning | Wipe with a soft, dry cloth. Do not use liquids. |
| Safety | Keep away from water and heat sources. Unplug during storms. |
| Spare Parts | Not available separately; replace the entire unit if defective. |
| Repairability | Not user-serviceable. Dispose according to local regulations. |
| Warranty | 2 years (subject to local conditions) |
Frequently Asked Questions - ANTDA4161 Audix
How do I install the Audix ANTDA4161 TV antenna?
Connect the included USB power cable to a 5V USB port and the coaxial cable to your TV's antenna input. Then position the antenna for best reception. The built-in amplifier automatically boosts weak signals.
What channels can I receive with this antenna?
The ANTDA4161 receives VHF (channels 7-13) and UHF (channels 14-51) signals, including DVB-T/T2 digital broadcasts. Actual channels depend on your location and tower proximity.
Why am I not getting any signal?
Check that the antenna is connected properly and the USB power cable is plugged in. Try moving the antenna to a higher location or near a window. Ensure your TV is set to receive over-the-air channels.
Does the antenna require power?
Yes, the built-in amplifier requires USB power. Connect the provided USB cable to a 5V USB port (such as a TV USB port or a USB wall adapter). Without power, reception will be severely limited.
Can I use this antenna outdoors?
No, this antenna is designed for indoor use only. Exposure to moisture or extreme temperatures may damage it. For outdoor use, consider an outdoor-rated antenna.
How can I improve reception?
Position the antenna as high as possible, preferably near a window facing the broadcast tower. Avoid obstructions like thick walls or metal objects. Adjust the antenna angle and try different locations.
Is this antenna compatible with all TVs?
It works with any TV that has a coaxial antenna input and supports DVB-T/T2 or ATSC (depending on your region). For older analog TVs, a digital converter box may be required.
Does the antenna come with a cable?
Yes, a coaxial cable and a USB power cable are included. The coaxial cable length is approximately 1.5 meters, which should be sufficient for most setups.
How do I clean the antenna?
Unplug the antenna and gently wipe the surface with a soft, dry cloth. Do not use water, cleaning agents, or abrasive materials, as they may damage the antenna.
What is the warranty period?
The Audix ANTDA4161 typically comes with a 2-year warranty. Contact the retailer or Audix support for specific warranty terms and conditions.
User questions about ANTDA4161 Audix
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your TV antenna in PDF format for free! Find your manual ANTDA4161 - Audix and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. ANTDA4161 by Audix.
USER MANUAL ANTDA4161 Audix
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Audix
Model : ANTDA4161
Category : TV antenna