DGSL-8-20-PA - Pneumatic valve Festo - Free user manual and instructions
Find the device manual for free DGSL-8-20-PA Festo in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Compact Pneumatic Linear Actuator |
| Model | DGSL-8-20-PA |
| Brand | Festo |
| Piston Diameter | 8 mm |
| Stroke Length | 20 mm |
| Actuation Type | Double-acting |
| Operating Pressure | 2 to 8 bar |
| Temperature Range | 0 to 60 °C |
| Weight | Approx. 0.1 kg |
| Body Material | Aluminum alloy |
| Piston Rod Material | Stainless steel |
| Seal Material | NBR |
| Port Size | M5 |
| Cushioning | Elastic cushioning rings |
| Mounting | Through-hole or threaded holes |
| Theoretical Force at 6 bar | Approx. 30 N |
| Medium | Compressed air, filtered and lubricated or non-lubricated |
| Maintenance | No regular maintenance required; clean if necessary |
| Safety | Do not exceed maximum pressure; use appropriate fittings |
| Spare Parts | Seal kits available |
| Reparability | Seals can be replaced with proper tools |
| Noise Level | < 70 dB(A) |
| Certifications | CE, RoHS |
Frequently Asked Questions - DGSL-8-20-PA Festo
How to install the DGSL-8-20-PA actuator?
Mount the actuator using the threaded holes or through-holes provided. Ensure proper alignment and secure with appropriate screws. Connect pneumatic ports using M5 fittings. Refer to the manual for detailed installation instructions.
What is the operating pressure range?
The recommended operating pressure is between 2 and 8 bar. Exceeding 8 bar can damage the actuator. Always use regulated compressed air.
Can it be used with lubricated air?
Yes, the actuator can operate with both lubricated and non-lubricated compressed air. If lubricated, use compatible pneumatic oils to avoid seal damage.
How to adjust cushioning?
The DGSL-8-20-PA has elastic cushioning rings at the end positions. These are factory-set and not adjustable. For applications requiring adjustable cushioning, consider a different model.
What is the maximum operating temperature?
The actuator can operate in temperatures from 0 to 60 °C. Exceeding this range may affect seal life and performance. Ensure ambient conditions are within limits.
How to replace seals?
To replace seals, remove the actuator from service, disassemble the end caps, and replace the old seals with new ones from a seal kit. Reassemble and test for leaks. Consult the manual for step-by-step guidance.
What is the force output at 6 bar?
At 6 bar, the actuator produces a theoretical force of approximately 30 N (based on piston area). Actual force may vary due to friction. Use the formula F = P × A for precise calculation.
Is it suitable for cleanroom environments?
The actuator is not specifically rated for cleanrooms. For cleanroom applications, verify with Festo if special versions are available or ensure proper particle control.
What is the weight?
The approximate weight is 0.1 kg. This makes it suitable for lightweight applications and compact installations.
Where to find the user manual?
The user manual can be downloaded for free from the Festo website or from notice-facile.com. Look for the model number DGSL-8-20-PA under the 'Download' section.
User questions about DGSL-8-20-PA Festo
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Pneumatic valve in PDF format for free! Find your manual DGSL-8-20-PA - Festo and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. DGSL-8-20-PA by Festo.
USER MANUAL DGSL-8-20-PA Festo
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Festo
Model : DGSL-8-20-PA
Category : Pneumatic valve