KDK

A30AS - Ceiling fan KDK - Free user manual and instructions

Find the device manual for free A30AS KDK in PDF.

📄 6 pages English EN Download 💬 AI Question 10 questions ⚙️ Specs
Notice KDK A30AS - page 1
Pick your language and provide your email: we'll send you a specifically translated version.
Product Type Ceiling Fan
Brand KDK
Model A30AS
Blade Span 30 inches (76 cm)
Number of Blades 3
Blade Material ABS plastic
Motor Type AC motor
Speed Settings 3 (Low, Medium, High)
Control Method Pull chain
Reversible Motor Yes (for summer/winter operation)
Power Supply 220-240V, 50Hz
Power Consumption 45 Watts (maximum)
Airflow Approximately 4000 CFM (at high speed)
Noise Level < 40 dB (at low speed)
Net Weight 4.5 kg
Dimensions (Fan Body) 30 x 30 x 15 cm (without blades)
Ceiling Angle Installation Up to 15 degrees
Minimum Ceiling Height 2.3 meters
Suitable for Indoor use only
Cleaning Instructions Wipe with a soft damp cloth; do not use abrasive cleaners
Maintenance Check blade balance and tighten screws periodically
Safety Features Overload protection, secure mounting bracket
Warranty 2 years from date of purchase
Included Accessories Mounting bracket, screws, pull chains, instruction manual

Frequently Asked Questions - A30AS KDK

How do I install the KDK A30AS ceiling fan?
Installation must be done by a qualified electrician. Ensure power is off. Mount the bracket to a ceiling joist, assemble the fan, attach blades, and connect wires per the user manual. Always follow local electrical codes.
How do I reverse the fan direction for winter?
The KDK A30AS has a reversible motor. Locate the reverse switch on the fan housing (usually a small toggle). Flip it to change from summer (counterclockwise) to winter (clockwise) rotation. Ensure fan is off before switching.
Can I use a remote control with this fan?
The A30AS is designed with pull chain control. It is not compatible with a remote control without additional wiring. Consult a professional if you wish to add a remote receiver.
How do I clean the fan blades?
Use a soft, dry or slightly damp cloth to wipe the blades. Avoid water on the motor. For stubborn dirt, use mild soap and water; dry immediately. Do not use abrasive cleaners.
Why is my fan wobbling?
Check that all blade screws are tight and the blades are evenly spaced. Use a balancing kit (included) to adjust weight distribution. Ensure the mounting bracket is secured to a solid support.
What is the maximum ceiling angle for installation?
The fan can be installed on ceilings with a slope up to 15 degrees. For steeper slopes, a special angled mounting kit may be required.
Does this fan come with a light kit?
No, the KDK A30AS is a fan-only model. It does not include a light kit, and it is not pre-wired for one. However, you may be able to add an aftermarket light kit if compatible.
What is the power consumption of this fan?
The maximum power consumption is approximately 45 watts at high speed. Actual usage may vary depending on speed setting.
How do I obtain spare parts (blades, pull chains)?
Contact KDK customer support or an authorized dealer. Provide the model number A30AS. Common spare parts include blades, pull chains, capacitors, and motor bearings.
Is this fan safe for outdoor use?
No, the KDK A30AS is rated for indoor use only. Exposure to moisture or extreme temperatures may cause electrical hazards and damage.

User questions about A30AS KDK

0 question about this device. Answer the ones you know or ask your own.

Ask a new question about this device

The email remains private: it is only used to notify you if someone responds to your question.

No questions yet. Be the first to ask one.

Download the instructions for your Ceiling fan in PDF format for free! Find your manual A30AS - KDK and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. A30AS by KDK.

USER MANUAL A30AS KDK

Manual assistant
Powered by Anthropic
Waiting for your message
Product information

Brand : KDK

Model : A30AS

Category : Ceiling fan