Stealth AS-10 - Subwoofer Wet Sounds - Free user manual and instructions
Find the device manual for free Stealth AS-10 Wet Sounds in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Subwoofer |
| Brand | Wet Sounds |
| Model | Stealth AS-10 |
| Speaker Size | 10 inches |
| Impedance | 4 ohms |
| RMS Power Handling | 300 Watts |
| Peak Power Handling | 600 Watts |
| Frequency Response | 30 Hz - 300 Hz |
| Sensitivity | 88 dB (1W/1m) |
| Recommended Enclosure Volume (Sealed) | 0.8 - 1.0 cubic feet |
| Mounting Depth | 5.5 inches |
| Mounting Cutout Diameter | 9.1 inches |
| Marine Grade | Yes (UV resistant, water resistant) |
| Grille Included | Yes, stainless steel |
| Weight | 8.5 lbs |
| Dimensions (Overall) | 10.5 x 10.5 x 6.5 inches |
| Power Supply | 12V DC (vehicle/boat electrical system) |
| Maintenance | Clean with mild soap and water; avoid pressure washers |
| Safety | Disconnect power before installation; secure mounting |
| Spare Parts | Contact Wet Sounds dealer for replacement grilles or hardware |
| Repairability | Consult authorized service center for cone or voice coil repair |
Frequently Asked Questions - Stealth AS-10 Wet Sounds
What is the recommended enclosure for the Stealth AS-10?
A sealed enclosure between 0.8 and 1.0 cubic feet is recommended for optimal performance. Ensure the enclosure is built from marine-grade materials if used in a wet environment.
Can the Stealth AS-10 be used in a car?
Yes, it is designed for both marine and automotive applications. It operates on a 12V DC electrical system and is built to withstand moisture and UV exposure, making it suitable for convertibles or off-road vehicles.
What amplifier should I use with the Stealth AS-10?
Use a mono or subwoofer amplifier delivering 300-600 watts RMS at 4 ohms. Amplifiers from Wet Sounds, such as the Syn-DX series, are recommended for best compatibility.
What is the mounting depth of the Stealth AS-10?
The mounting depth is approximately 5.5 inches. Ensure your enclosure or mounting location has sufficient clearance.
Is the subwoofer waterproof?
The Stealth AS-10 is marine-grade, meaning it is water-resistant and UV-stabilized. However, it is not fully submersible. Avoid direct exposure to high-pressure water sprays.
What is the frequency response of the Stealth AS-10?
The frequency response is 30 Hz to 300 Hz. This allows it to produce deep bass while blending well with midrange speakers.
Does the Stealth AS-10 come with a grille?
Yes, it includes a stainless steel grille to protect the cone from debris. The grille is designed to resist corrosion in marine environments.
What is the sensitivity of the Stealth AS-10?
The sensitivity is 88 dB (1W/1m). This means it produces moderate output with low power, but pairing with a quality amplifier is still recommended.
How do I clean the Stealth AS-10?
Clean the subwoofer with a mild soap and water solution using a soft cloth. Avoid abrasive cleaners, solvents, or pressure washers, as they can damage the cone or surround.
Where can I find replacement parts for the Stealth AS-10?
Contact your local Wet Sounds dealer or visit the official Wet Sounds website for spare parts such as grilles, mounting hardware, or recone kits. Use only genuine Wet Sounds components.
User questions about Stealth AS-10 Wet Sounds
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Subwoofer in PDF format for free! Find your manual Stealth AS-10 - Wet Sounds and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. Stealth AS-10 by Wet Sounds.
USER MANUAL Stealth AS-10 Wet Sounds
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Wet Sounds
Model : Stealth AS-10
Category : Subwoofer