Nectre

Form 2 - Heating Nectre - Free user manual and instructions

Find the device manual for free Form 2 Nectre in PDF.

📄 12 pages English EN Download 💬 AI Question 10 questions ⚙️ Specs
Notice Nectre Form 2 - page 6
Pick your language and provide your email: we'll send you a specifically translated version.
Product Type Wood Heater
Dimensions (H x W x D) Approx. 600 x 500 x 450 mm
Weight Approx. 85 kg
Fuel Type Wood logs
Heating Output Up to 8 kW
Efficiency High efficiency with secondary combustion
Main Functions Room heating, slow combustion
Control Type Manual air control
Ignition Manual with firelighters
Door Construction Cast iron with heat-resistant glass
Airwash System Keeps glass clean
Combustion Air Adjustable primary and secondary air
Flue Outlet Top or rear (150mm diameter)
Firebox Lining Refractory bricks
Emissions Low emissions compliant
Maintenance Regular ash removal and glass cleaning
Safety Features Cool-touch handle, spark guard
Spare Parts Availability Available from Nectre dealers
Warranty Limited lifetime on steel body
Country of Origin Australia

Frequently Asked Questions - Form 2 Nectre

How do I install the Nectre Form 2 wood heater?
Installation must comply with local building codes. Ensure a proper hearth, flue, and clearance from combustibles. It is recommended to use a certified installer.
What type of wood should I use?
Use seasoned hardwood with moisture content below 20%. Avoid softwoods, treated wood, or wet wood to prevent excessive creosote buildup.
How do I clean the glass door?
Clean the glass with a damp cloth and wood ash or a specialized stove glass cleaner when the heater is cold. The airwash system reduces soot deposits.
How often should I remove ash?
Remove ash when it reaches about 2 inches deep. Leave a thin layer (1/2 inch) to help insulate the firebox and maintain combustion.
What is the maximum log length?
The maximum log length is approximately 450 mm (18 inches) to fit comfortably in the firebox.
How do I control the burn rate?
Use the primary air control to adjust combustion. Open for a faster burn, close for slower burning. The secondary air helps reignite gases.
What should I do if the heater smokes into the room?
Check for proper flue draft, open the air control fully, and ensure the flue is clean. Avoid opening the door too quickly when reloading.
How often should the flue be cleaned?
Inspect and clean the flue at least once a year, or more frequently if burning wet wood. Creosote buildup can cause chimney fires.
Can I use the heater overnight?
Yes, by setting the air controls to a low setting. Ensure proper clearance and never leave the heater unattended with the door open.
Where can I find spare parts?
Spare parts such as door gaskets, glass, and bricks are available from authorized Nectre dealers or online retailers.

User questions about Form 2 Nectre

0 question about this device. Answer the ones you know or ask your own.

Ask a new question about this device

The email remains private: it is only used to notify you if someone responds to your question.

No questions yet. Be the first to ask one.

Download the instructions for your Heating in PDF format for free! Find your manual Form 2 - Nectre and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. Form 2 by Nectre.

USER MANUAL Form 2 Nectre

Manual assistant
Powered by Anthropic
Waiting for your message
Product information

Brand : Nectre

Model : Form 2

Category : Heating