PCA2BT - Receiver Pyle - Free user manual and instructions
Find the device manual for free PCA2BT Pyle in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Receiver |
| Brand | Pyle |
| Model | PCA2BT |
| Dimensions (W x D x H) | 8.5 x 5.5 x 2.2 inches |
| Weight | 1.5 lbs |
| Power Supply | AC 110-240V, 50/60Hz |
| Bluetooth Version | 4.2 |
| Wireless Range | Up to 30 feet |
| Supported Audio Sources | Bluetooth, AM/FM Radio, USB, SD Card, AUX |
| Output Power | 20W RMS (10W x 2) |
| Frequency Response | 20Hz - 20kHz |
| Impedance | 4-8 Ohms |
| Radio Bands | FM (87.5-108 MHz), AM (520-1710 kHz) |
| Antenna | Built-in AM loop and FM wire antenna |
| Inputs | AUX (3.5mm), USB Type-A, SD Card Slot |
| Outputs | Headphone jack (3.5mm), Speaker terminals |
| Controls | Rotary volume, buttons for source, track, play/pause |
| Display | LED backlit LCD |
| Care and Cleaning | Wipe with a soft, dry cloth. Do not use liquid cleaners. |
| Safety Precautions | Keep away from moisture and heat sources. Unplug during storms. |
| Spare Parts / Repairability | Contact Pyle customer support for parts and service. |
| General Information | Mini stereo receiver with Bluetooth; suitable for home audio. |
Frequently Asked Questions - PCA2BT Pyle
How do I pair my phone with the PCA2BT via Bluetooth?
Turn on the receiver and press the Source button until Bluetooth is selected. Enable Bluetooth on your phone and search for PCA2BT. Select it to pair. If prompted, enter 0000 as the PIN.
How can I reset the receiver to factory settings?
Press and hold the Volume knob for 5 seconds until the display shows RESET. Release the knob to reset all settings.
Why is there no sound from the speakers?
Check that the speakers are properly connected to the terminals and the impedance matches (4-8 Ohms). Ensure the volume is turned up and the source is playing audio. Also verify that the unit is not muted.
How do I tune into FM or AM radio?
Press the Source button until FM or AM appears. Use the Scan button to auto-search for stations, or rotate the Tuning knob manually. To save a station, press and hold a preset number (1-10).
Can I play music from a USB drive or SD card?
Yes. Insert a USB drive or SD card with MP3 files into the corresponding slot. The receiver will automatically detect and start playing. Use the Play/Pause, Next, and Prev buttons to control playback.
What is the maximum power output?
The PCA2BT delivers 20W RMS total (10W per channel) into 4-8 Ohm speakers.
How do I connect an external audio device via AUX?
Use a 3.5mm audio cable to connect your device to the AUX IN jack on the front panel. Press the Source button until AUX is shown.
Does the receiver have a headphone jack?
Yes, there is a 3.5mm headphone jack on the front panel. Insert headphones to listen privately; the speakers will automatically mute.
How do I clean the receiver?
Unplug the unit and wipe the exterior with a soft, dry cloth. Do not use any liquid or abrasive cleaners.
What should I do if the remote control stops working?
First, replace the batteries with fresh ones (CR2032). Ensure there are no obstructions between the remote and the receiver. If it still doesn't work, try resetting the receiver (hold Volume knob). If the issue persists, contact Pyle support.
User questions about PCA2BT Pyle
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Receiver in PDF format for free! Find your manual PCA2BT - Pyle and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. PCA2BT by Pyle.
USER MANUAL PCA2BT Pyle
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Pyle
Model : PCA2BT
Category : Receiver