01975 - Measurement Vimar - Free user manual and instructions
Find the device manual for free 01975 Vimar in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Measurement Device |
| Brand | Vimar |
| Model | 01975 |
| Dimensions (approx.) | 150 x 80 x 30 mm |
| Weight (approx.) | 0.2 kg |
| Power Supply | 2 x AAA batteries (1.5V each) |
| Primary Functions | AC/DC voltage, DC current, resistance measurement |
| Accuracy (DC Voltage) | ±0.5% of reading + 3 digits |
| Safety Rating | CAT II 300V |
| Display | LCD, 3.5 digits |
| Auto Power Off | Yes, after 15 minutes of inactivity |
| Data Hold | Yes |
| Low Battery Indicator | Yes |
| Maintenance | Clean with a soft, dry cloth. Do not use solvents. |
| Spare Parts Available | Test leads, batteries |
| Repairability | Limited; refer to authorized service center |
| General Information | Designed for electrical measurements in household and light industrial applications. |
Frequently Asked Questions - 01975 Vimar
How do I measure AC voltage with the Vimar 01975?
Set the rotary switch to the ACV position. Connect the black lead to COM and red lead to V/Ω. Touch the probes to the circuit points. Read the value on the LCD.
What type of battery does the 01975 use?
The device uses two AAA 1.5V batteries. Open the back cover to replace them.
How do I enable the data hold function?
Press the HOLD button once. The reading will freeze on the display. Press again to release.
What is the maximum voltage I can measure?
The maximum input voltage is 300V AC/DC (CAT II). Exceeding this may damage the meter.
Why does the meter show '1' on the display?
A '1' indicates an overload or open circuit. Check your probe connections and ensure the measurement range is correct.
How do I measure resistance?
Set the rotary switch to the Ω position. Ensure the circuit is de-energized. Connect probes across the resistor. Read the value.
Does the device have auto-ranging?
No, the Vimar 01975 is a manual-ranging meter. You must select the appropriate range using the rotary switch.
How do I clean the meter?
Use a soft, dry cloth to wipe the exterior. Do not use any liquids or abrasives.
What is the accuracy of the Vimar 01975?
DC voltage accuracy is ±0.5% of reading + 3 digits. AC voltage accuracy is ±1.0% of reading + 5 digits.
Where can I find replacement test leads?
Replacement test leads can be purchased from Vimar authorized dealers or online retailers. Ensure they are rated for CAT II 300V.
User questions about 01975 Vimar
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Measurement in PDF format for free! Find your manual 01975 - Vimar and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. 01975 by Vimar.
USER MANUAL 01975 Vimar
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Vimar
Model : 01975
Category : Measurement