Panamax

MOD-AT2 - Power bank Panamax - Free user manual and instructions

Find the device manual for free MOD-AT2 Panamax in PDF.

📄 2 pages English EN Download 💬 AI Question 10 questions ⚙️ Specs
Notice Panamax MOD-AT2 - page 1
Pick your language and provide your email: we'll send you a specifically translated version.
Product Type External Battery / Power Bank
Brand Panamax
Model MOD-AT2
Battery Type Lithium-ion
Battery Capacity 10000 mAh (37 Wh)
Input Port USB-C (5V/2A, 10W)
Output Ports 2x USB-A (5V/2.1A each)
Total Output Current Up to 2.1A shared
Charging Time Approximately 5 hours
Dimensions 150 x 70 x 15 mm
Weight 250 g
LED Indicators 4 blue LEDs for battery level
Safety Features Overcharge, over-discharge, short circuit protection
Operating Temperature 0°C to 40°C
Material ABS plastic
Color Black
Compatibility Smartphones, tablets, cameras, and other USB devices
Warranty 1 year

Frequently Asked Questions - MOD-AT2 Panamax

How long does it take to fully charge the Panamax MOD-AT2?
Using the recommended USB-C input (5V/2A), it takes approximately 5 hours to charge the power bank from empty to full.
Can I charge my laptop with this power bank?
No, the MOD-AT2 outputs a maximum of 5V/2.1A (10.5W total), which is not sufficient for most laptops. It is designed for smartphones, tablets, and small USB devices.
How do I check the battery level of the power bank?
Press the side button once to activate the 4 LED indicators. Each LED represents approximately 25% charge: 4 LEDs = 100%, 3 = 75%, etc. If no LEDs light up, the battery is empty.
What devices are compatible with the MOD-AT2?
Any device that charges via USB-A is compatible, including smartphones, tablets, Bluetooth headphones, cameras, and portable gaming consoles. The total output current is shared between the two ports.
Can I use the power bank while it is charging?
Yes, the MOD-AT2 supports pass-through charging, allowing you to charge the power bank and a connected device simultaneously. However, expect slower charging for both.
Is it safe to leave the power bank plugged in overnight?
Yes, the MOD-AT2 has built-in protections including overcharge protection. Once fully charged, the input will be automatically cut off to prevent damage.
How should I clean and maintain the power bank?
Disconnect all cables and wipe the exterior with a soft, dry cloth. Do not use liquid cleaners or immerse in water. Store it in a cool, dry place away from direct sunlight.
What do the LED indicators mean when charging?
During charging, the LEDs will flash sequentially to indicate the current charge level. When all 4 LEDs are solid, the power bank is fully charged.
Can I take the Panamax MOD-AT2 on an airplane?
Yes, power banks with a capacity of 10000 mAh (37 Wh) are allowed in carry-on luggage. Check with your airline for specific regulations, as it may vary.
What should I do if the power bank stops working?
First, try charging it for a few minutes. If it still does not respond, hold the button for 10 seconds to reset it. If that fails, contact Panamax customer support for assistance.

User questions about MOD-AT2 Panamax

0 question about this device. Answer the ones you know or ask your own.

Ask a new question about this device

The email remains private: it is only used to notify you if someone responds to your question.

No questions yet. Be the first to ask one.

Download the instructions for your Power bank in PDF format for free! Find your manual MOD-AT2 - Panamax and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. MOD-AT2 by Panamax.

USER MANUAL MOD-AT2 Panamax

Manual assistant
Powered by Anthropic
Waiting for your message
Product information

Brand : Panamax

Model : MOD-AT2

Category : Power bank