100P3N - Watering Irritrol - Free user manual and instructions
Find the device manual for free 100P3N Irritrol in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Pop-up Sprinkler |
| Brand | Irritrol |
| Model | 100P3N |
| Pop-up Height | 3 inches (76 mm) |
| Inlet Size | 1/2" Female NPT |
| Nozzle Type | Precision spray nozzle |
| Flow Rate | 0.5 - 2.0 GPM (1.9 - 7.6 L/min) |
| Pressure Range | 20 - 50 PSI (1.4 - 3.4 bar) |
| Spray Radius | 8 - 15 feet (2.4 - 4.6 m), adjustable |
| Material | High-impact plastic body, stainless steel spring |
| Seal | Wiper seal for retraction |
| Operating Temperature | 32°F - 110°F (0°C - 43°C) |
| Warranty | 5 years |
| Application | Residential and light commercial |
Frequently Asked Questions - 100P3N Irritrol
How do I adjust the spray radius on the Irritrol 100P3N?
Turn the adjustment screw on top of the nozzle clockwise to decrease radius or counterclockwise to increase. Use a small flathead screwdriver. Do not force beyond stops.
What is the recommended operating pressure for this sprinkler?
The recommended pressure range is 20 to 50 PSI. Operating outside this range may affect performance or damage the unit.
Can I replace the nozzle on the 100P3N?
Yes, the nozzle is replaceable. Unscrew the old nozzle and install a compatible Irritrol precision nozzle. Ensure the o-ring is properly seated.
How do I clean the filter inside the sprinkler?
Remove the nozzle, then pull out the filter screen. Rinse with water and brush off debris. Reinstall before replacing the nozzle.
The sprinkler does not pop up fully. What should I do?
Check for debris in the cylinder. Remove the cap and clean the interior. Ensure water pressure is sufficient (at least 20 PSI). The spring may need replacement if worn.
Is the 100P3N suitable for underground installation?
Yes, it is designed for in-ground installation. Use a flush mount or riser adapter. Ensure the top is at grade level.
How do I winterize this sprinkler?
Blow out the water using compressed air or drain the system. The sprinkler should be stored in a frost-free location if removed.
What is the maximum flow rate for the 100P3N?
The maximum flow rate is approximately 2.0 GPM. Exceeding this may cause misting or poor coverage.
Does the sprinkler come with a warranty?
Yes, Irritrol offers a 5-year warranty against defects in materials and workmanship.
Can I use the 100P3N with dirty water?
It is designed for clean water. Dirty water can clog the nozzle and filter. Use a filtration system if necessary.
User questions about 100P3N Irritrol
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Watering in PDF format for free! Find your manual 100P3N - Irritrol and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. 100P3N by Irritrol.
USER MANUAL 100P3N Irritrol
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Irritrol
Model : 100P3N
Category : Watering