Power Star 16.2 - Loudspeaker MAC AUDIO - Free user manual and instructions
Find the device manual for free Power Star 16.2 MAC AUDIO in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Passive PA Loudspeaker |
| Speaker Configuration | 2-way (Woofer + Tweeter) |
| Woofer Size | 16 inches |
| Power Handling (RMS) | 400 W |
| Power Handling (Peak) | 800 W |
| Impedance | 8 Ohms |
| Frequency Response | 45 Hz – 20 kHz |
| Sensitivity | 97 dB (1W/1m) |
| Dimensions (H x W x D) | 28 x 18 x 16 inches (approx.) |
| Weight | 55 lbs (approx.) |
| Enclosure Material | Plywood with carpet covering |
| Connectors | 2 x Speakon NL4, 1/4" phone jack |
| Mounting | 35mm pole mount, flying points |
| Grille | Steel with acoustic foam |
| Usage | PA sound reinforcement, DJ, live music |
| Cleaning | Wipe with dry cloth; avoid moisture |
| Safety | Keep away from rain; use proper stands |
| Spare Parts | Available via MAC AUDIO service centers |
| Repairability | Replaceable drivers and crossovers |
| General Information | Designed for professional audio use |
Frequently Asked Questions - Power Star 16.2 MAC AUDIO
How do I connect the Power Star 16.2 to an amplifier?
Use a Speakon NL4 or 1/4" TS cable to connect the speaker to the amplifier output. Ensure the amplifier is turned off during connection. Match the impedance (8 Ohms) and power rating.
What is the recommended amplifier power?
Use an amplifier with 400-800 Watts RMS per channel at 8 Ohms for optimal performance without damaging the speaker.
Can I use this speaker outdoors?
Yes, but it is not weatherproof. Protect it from rain and direct sunlight. Use a cover when not in use.
How do I clean the speaker grille?
Gently vacuum the grille or use a soft brush. For stubborn dirt, lightly dampen a cloth with mild soap and water, then dry immediately. Avoid getting moisture inside the speaker.
Does the speaker come with a pole mount?
The speaker has a built-in 35mm pole mount socket on the bottom. You will need a separate speaker stand and pole.
What is the maximum power handling?
The continuous (RMS) power handling is 400 Watts, with a peak capacity of 800 Watts. Exceeding these values may cause damage.
How should I position the speakers for best sound?
Place them at ear level, aim them toward the audience, and avoid corners to reduce bass buildup. Use stands for optimal dispersion.
Can I replace the woofer or tweeter myself?
Yes, but it requires technical skill. Ensure you use genuine MAC AUDIO replacement parts. Disconnect power and follow the service manual.
What type of cable should I use?
Use heavy-gauge speaker cable (12 AWG or lower) with Speakon or 1/4" TS connectors. Keep cable runs under 50 feet to minimize loss.
Is there a warranty?
MAC AUDIO typically offers a limited warranty. Check your retailer or contact MAC AUDIO support for specific terms and duration.
User questions about Power Star 16.2 MAC AUDIO
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Loudspeaker in PDF format for free! Find your manual Power Star 16.2 - MAC AUDIO and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. Power Star 16.2 by MAC AUDIO.
USER MANUAL Power Star 16.2 MAC AUDIO
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : MAC AUDIO
Model : Power Star 16.2
Category : Loudspeaker