2507TF - Irrigation Control Irritrol - Free user manual and instructions
Find the device manual for free 2507TF Irritrol in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Irrigation Controller |
| Brand | Irritrol |
| Model | 2507TF |
| Dimensions (approx.) | 7.5 x 5.5 x 1.5 inches |
| Weight (approx.) | 1 lb |
| Power Supply | 24 VAC, 50/60 Hz (transformer required) |
| Number of Stations | 7 stations |
| Programs | 3 independent programs (A, B, C) |
| Start Times per Program | 4 start times |
| Station Run Time | 1 minute to 4 hours |
| Watering Days | Custom days of week, odd/even, or interval |
| Rain Delay | Up to 7 days |
| Manual Operation | Manual single station or program |
| Pump / Master Valve Circuit | Yes (24 VAC, 0.5 A max) |
| Sensor Compatible | Rain sensor (normally closed) |
| Display | LCD with backlight |
| Mounting | Wall mount or pedestal |
| Enclosure Rating | Indoor use only |
| Warranty | 2 years limited warranty |
| Maintenance | Keep display clean; check wiring annually |
| Safety | Install in dry location; use with GFCI outlet |
Frequently Asked Questions - 2507TF Irritrol
How do I set the current time and date on the Irritrol 2507TF?
Press the SET button until the time display flashes. Use the + and - buttons to adjust the hour, then press SET again to confirm. Repeat for minutes, day, month, and year.
How many watering programs does the 2507TF support?
The Irritrol 2507TF supports 3 independent programs (A, B, C), each with up to 4 start times per program.
Can I connect a rain sensor to the 2507TF?
Yes, the controller has a terminal for a normally closed rain sensor. When the sensor is active, watering is automatically suspended.
How do I run a single station manually?
Turn the dial to MANUAL. Press the + or - button to select the desired station, then press ENTER. Use +/- to set run time and press START.
What is the maximum run time per station?
Each station can be set to run from 1 minute up to 4 hours (240 minutes).
How do I set a rain delay?
Turn the dial to RAIN DELAY. Press + or - to set the number of days (1-7) to delay watering. Press ENTER to activate.
The display is blank. What should I check?
Ensure the controller is receiving 24 VAC power. Check the transformer and wiring connections. If using batteries, replace them (9V backup).
Why is my program not watering at the scheduled times?
Verify that the clock is set correctly, the program is enabled, the watering days are configured, and no rain delay or sensor is active.
Can I install the 2507TF outdoors?
The 2507TF is designed for indoor use only. If outdoor installation is required, use a weatherproof enclosure rated for the controller.
How do I reset the controller to factory defaults?
Press and hold the RESET button (located on the front panel) for 5 seconds. All settings will revert to factory values.
User questions about 2507TF Irritrol
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Irrigation Control in PDF format for free! Find your manual 2507TF - Irritrol and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. 2507TF by Irritrol.
USER MANUAL 2507TF Irritrol
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Irritrol
Model : 2507TF
Category : Irrigation Control