PLA2378 - Receiver Pyle - Free user manual and instructions
Find the device manual for free PLA2378 Pyle in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Stereo Receiver |
| Model | PLA2378 |
| Brand | Pyle |
| Dimensions (W x H x D) | 17.2 x 5.5 x 13.8 inches |
| Weight | 12.5 lbs |
| Power Supply | AC 120V / 60Hz |
| Power Output | 100W per channel (4 ohms) |
| Radio Tuner | AM/FM with digital tuning |
| Audio Inputs | RCA (2 pairs), AUX (3.5mm), USB, Bluetooth |
| Speaker Outputs | Left/Right speaker terminals (spring clip) |
| Headphone Jack | Yes, 1/4 inch |
| Remote Control | Included (IR) |
| Display | LCD with backlight |
| Bluetooth Version | 5.0 |
| USB Playback | MP3, WMA, WAV |
| Maximum Power Consumption | 500W |
| Maintenance | Wipe with dry cloth; avoid liquids |
| Safety Warnings | Do not expose to rain or moisture; use only supplied power cord |
| Spare Parts | Contact Pyle support for remote control, power cord |
| Repairability | No user-serviceable parts inside; contact authorized service center |
| General Information | Designed for home audio; built-in FM antenna included |
Frequently Asked Questions - PLA2378 Pyle
How do I connect speakers to the PLA2378?
Use the spring-clip terminals on the back. Strip wires, insert, and release. Ensure correct polarity (red to positive, black to negative).
How can I tune into FM radio stations?
Press the Tuner button to select FM. Use the Tune +/- buttons or auto-scan via remote. Extend the included FM antenna.
Why is there no sound from my speakers?
Check that speakers are properly connected, source is selected, volume is up, and receiver is not muted. Also verify speaker wires are not shorted.
How do I pair a Bluetooth device?
Press the Bluetooth button to enter pairing mode. On your device, select 'PLA2378'. If prompted, enter 0000.
Can I play music from a USB flash drive?
Yes, insert a USB drive with MP3 files. Press USB to select. Use play/pause, skip buttons to control playback.
How do I reset the receiver?
Unplug the unit for 30 seconds, then plug back in. For factory reset, press and hold the Power button for 5 seconds (if applicable).
My remote control doesn't work. What should I do?
Replace batteries (CR2025 or AAA depending on model). Ensure line-of-sight to the receiver. Try cleaning the IR sensor.
Can I use the receiver with outdoor speakers?
Yes, if the impedance matches (4-8 ohms). Ensure speakers are rated for outdoor use and protected from moisture.
What is the maximum power output?
The PLA2378 delivers up to 100W per channel into 4-ohm speakers, with total harmonic distortion less than 0.5%.
How do I clean the receiver?
Unplug the unit. Wipe with a soft, dry cloth. Do not use any liquid or aerosol cleaners. Avoid getting moisture into vents.
User questions about PLA2378 Pyle
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Receiver in PDF format for free! Find your manual PLA2378 - Pyle and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. PLA2378 by Pyle.
USER MANUAL PLA2378 Pyle
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Pyle
Model : PLA2378
Category : Receiver