Pyle

PKST52 - Microphone Pyle - Free user manual and instructions

Find the device manual for free PKST52 Pyle in PDF.

📄 1 pages English EN Download 💬 AI Question 10 questions ⚙️ Specs
Notice Pyle PKST52 - page 1
Pick your language and provide your email: we'll send you a specifically translated version.
Product Type Dynamic Vocal Microphone
Brand Pyle
Model PKST52
Dimensions (approx.) 6.5 x 2.5 x 2.5 inches (165 x 63 x 63 mm)
Weight (approx.) 0.5 lbs (230 g)
Power Source Passive (no battery required)
Polar Pattern Cardioid
Frequency Response 50 Hz – 15 kHz
Impedance 600 ohms
Connector XLR (3-pin male)
Material Metal body with grille
On/Off Switch Yes, on mic body
Included Accessories Clip, carrying bag, cable (varies)
Maintenance Wipe with dry cloth; avoid moisture
Safety Keep away from liquids; do not disassemble
Spare Parts Replacement grilles and connectors available
Intended Use Karaoke, PA systems, home recording
Warranty 1 year limited
Manual Languages English (PDF available)

Frequently Asked Questions - PKST52 Pyle

How do I connect the PKST52 microphone to my amplifier?
Use a standard 3-pin XLR cable to connect the microphone's output to a mixer or amplifier with an XLR input. Ensure the amplifier is turned off while connecting to avoid feedback.
Does the Pyle PKST52 require batteries?
No, the PKST52 is a dynamic microphone that is fully passive and does not require batteries or external power.
What is the polar pattern of this microphone?
The PKST52 has a cardioid polar pattern, which picks up sound primarily from the front and rejects noise from the sides and rear.
Can I use this microphone for recording vocals?
Yes, the PKST52 is suitable for home recording, karaoke, and vocal applications. It pairs well with audio interfaces or mixers.
How do I clean the microphone?
Clean the microphone body with a dry or slightly damp cloth. Avoid getting moisture into the grille. The grille can be removed for deeper cleaning if needed.
Is the microphone compatible with my computer?
Yes, if you have an audio interface or a mixer with XLR input that connects to your computer via USB, the microphone works for streaming or recording.
What is the frequency range of the PKST52?
The specified frequency response is approximately 50 Hz to 15 kHz, suitable for vocals and speech.
Does the microphone have an on/off switch?
Yes, the microphone body includes a built-in on/off switch for convenience during performances.
What accessories are included in the box?
Typically, the package includes the microphone, a microphone clip, a carrying bag, and a 20 ft XLR cable (but check the specific listing).
How do I replace the grille if it gets damaged?
The grille is replaceable. Unscrew the bottom ring of the microphone head, remove the old grille, and install a new one. Spare grilles can be purchased from Pyle or third-party vendors.

User questions about PKST52 Pyle

0 question about this device. Answer the ones you know or ask your own.

Ask a new question about this device

The email remains private: it is only used to notify you if someone responds to your question.

No questions yet. Be the first to ask one.

Download the instructions for your Microphone in PDF format for free! Find your manual PKST52 - Pyle and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. PKST52 by Pyle.

USER MANUAL PKST52 Pyle

Manual assistant
Powered by Anthropic
Waiting for your message
Product information

Brand : Pyle

Model : PKST52

Category : Microphone