EQAXF1SXWG - Water dispenser ELECTROLUX - Free user manual and instructions
Find the device manual for free EQAXF1SXWG ELECTROLUX in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Water Dispenser |
| Brand | Electrolux |
| Model | EQAXF1SXWG |
| Water Supply Type | Bottled (5-gallon/18.9L compatible) |
| Hot Water Temperature | 85-95°C |
| Cold Water Temperature | 5-10°C |
| Dimensions (W x D x H) | 300 x 350 x 1000 mm |
| Weight | 15 kg |
| Power Consumption | 600W (heating), 100W (cooling) |
| Voltage / Frequency | 220-240V, 50Hz |
| Cooling System | Compressor |
| Safety Features | Child lock, auto shut-off, overheat protection |
| Maintenance | Clean drip tray weekly; descale monthly; replace filter every 6 months (if equipped) |
| Key Parts | Drip tray, faucets, water tubes, filters, cooling fan |
| Repairability | Spare parts available through Electrolux service centers; user replaceable filters |
| Warranty | 2 years (typical) |
Frequently Asked Questions - EQAXF1SXWG ELECTROLUX
How do I clean my Electrolux water dispenser EQAXF1SXWG?
Clean the exterior with a damp cloth. For the drip tray, remove and wash with warm soapy water. Descale the internal system every 1-2 months using a descaling solution. Refer to the manual for detailed instructions.
What type of water bottle can I use?
This dispenser is designed for standard 5-gallon (18.9L) water bottles with a 55mm neck. Do not use glass bottles or bottles with damaged caps.
Why is my water not getting hot?
Check that the hot water switch is turned on. If still not heating, ensure the unit has been plugged in for at least 30 minutes. If the problem persists, the heating element may need replacement.
How do I change the filter?
If your model includes a water filter, it is usually located inside the reservoir. Turn off the unit, remove the old filter, insert a new one (Electrolux part number XXXXX). Run water through for 2 minutes before use.
What are the dimensions of the EQAXF1SXWG?
Approximately 300 mm wide, 350 mm deep, and 1000 mm high. Ensure at least 100 mm clearance around the unit for ventilation.
Does the dispenser have a child lock?
Yes, the EQAXF1SXWG includes a child safety lock on the hot water tap. Press the lock button simultaneously with the tap to dispense hot water.
How often should I descale the machine?
Descaling every 1-2 months is recommended to prevent mineral buildup. Use a commercial descaling solution or a mixture of white vinegar and water. Follow the manual's descaling procedure.
Can I use the dispenser with a direct water line?
No, this model is designed for bottled water only. Do not attempt to connect it to a plumbed water line, as it may cause damage.
What should I do if the water tastes bad?
If the water tastes odd, replace the water bottle. If the taste persists, clean the reservoir and replace the filter. Also, descale the unit to remove any buildup that could affect taste.
Where can I find spare parts for my water dispenser?
Spare parts are available through Electrolux authorized service centers or online. Common parts like drip trays, faucets, and filters can also be found on the Electrolux website.
User questions about EQAXF1SXWG ELECTROLUX
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Water dispenser in PDF format for free! Find your manual EQAXF1SXWG - ELECTROLUX and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. EQAXF1SXWG by ELECTROLUX.
USER MANUAL EQAXF1SXWG ELECTROLUX
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : ELECTROLUX
Model : EQAXF1SXWG
Category : Water dispenser