Tapographic Delay - Synthesizer 4ms - Free user manual and instructions
Find the device manual for free Tapographic Delay 4ms in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Type | Eurorack synthesizer module - delay effect |
| Dimensions (W x H x D) | 10 HP x 3U x 25 mm |
| Weight | 120 g |
| Power Supply | +12V / -12V (via Eurorack bus board), 50 mA / 20 mA |
| Delay Time Range | 20 ms to 2 seconds |
| Feedback Control | 0 to 100% with infinite hold capability |
| Mix Control | Dry/Wet blend from 0% to 100% |
| Audio Inputs | 2 x 1/8" mono jacks (left and right) |
| Audio Outputs | 2 x 1/8" mono jacks (left and right) |
| Tap Tempo Input | 1 x 1/8" jack for external tap tempo |
| CV Control | Delay time, feedback, and mix via CV inputs (0-5V) |
| Front Panel Controls | 3 knobs (Time, Feedback, Mix), 1 button (Tap), 1 LED |
| Construction | Aluminum faceplate, steel chassis |
| Color | Black faceplate with white silkscreen |
| Usage | In Eurorack case with standard power connector |
| Maintenance | Wipe with dry cloth; avoid liquids |
| Safety | Do not reverse power cable; disconnect before moving |
| Spare Parts | Contact 4ms or authorized dealers for replacement knobs, jacks |
| Repair | Refer to 4ms warranty policy; do not attempt self-repair |
| General Information | Tapographic Delay is a stereo tapped delay with CV control, ideal for experimental and ambient soundscapes. |
Frequently Asked Questions - Tapographic Delay 4ms
What is the power requirement for the Tapographic Delay?
It requires +12V (50 mA) and -12V (20 mA) from a standard Eurorack bus board.
Can I use the Tapographic Delay with line-level signals?
Yes, it accepts line-level signals via 1/8" jacks, but for optimal performance, keep signals within typical modular levels.
How do I set the delay time using tap tempo?
Press the Tap button at the desired tempo, or connect an external clock to the Tap input. The delay time will sync to the tapped rhythm.
What does the CV input for feedback do?
The CV input for feedback modulates the amount of feedback sent back into the delay line, allowing dynamic changes from mild repeats to self-oscillation.
Can I achieve infinite repeats?
Yes, by turning the Feedback knob fully clockwise, the feedback loop can sustain indefinitely, creating a drone effect.
Does the Tapographic Delay have stereo capability?
Yes, it has two input and two output jacks for true stereo processing, with independent left and right delay paths.
What is the maximum delay time?
The maximum delay time is 2 seconds, adjustable via the Time knob or CV.
How do I clean the module?
Use a soft, dry cloth to wipe the front panel. Avoid using solvents or liquids that could damage the electronics.
What should I do if the module is not powering on?
Check that the power ribbon cable is correctly oriented (red stripe to -12V). Ensure your Eurorack power supply has sufficient current capacity.
Is the Tapographic Delay compatible with other Eurorack modules?
Yes, it follows the Eurorack standard for CV and audio levels, making it compatible with most modules from other manufacturers.
User questions about Tapographic Delay 4ms
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Synthesizer in PDF format for free! Find your manual Tapographic Delay - 4ms and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. Tapographic Delay by 4ms.
USER MANUAL Tapographic Delay 4ms
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : 4ms
Model : Tapographic Delay
Category : Synthesizer