LNP3020T - Security Camera LG - Free user manual and instructions
Find the device manual for free LNP3020T LG in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Security Camera |
| Brand | LG |
| Model | LNP3020T |
| Resolution | 1920 x 1080 (Full HD) |
| Lens | Fixed, 3.6mm, F2.0 |
| Field of View | 80° horizontal, 45° vertical |
| Night Vision | IR LEDs up to 30 meters |
| Video Compression | H.265, H.264, MJPEG |
| Frame Rate | 30 fps at 1080p |
| Audio | Two-way audio (built-in mic and speaker) |
| Communication | Ethernet (RJ-45), Wi-Fi not supported |
| Protocols | TCP/IP, HTTP, RTSP, ONVIF |
| Detection | Motion detection, tamper detection |
| Storage | MicroSD card up to 128 GB, NVR compatible |
| Power Supply | PoE (802.3af) or 12V DC adapter |
| Power Consumption | Max 6W |
| Ingress Protection | IP66 (outdoor rated) |
| Dimensions | 7.2 x 7.2 x 12.5 cm (2.8 x 2.8 x 4.9 in) |
| Weight | 350 g (0.77 lb) |
| Operating Temperature | -30°C to +60°C (-22°F to +140°F) |
| Mounting | Wall or ceiling bracket included |
| Security | Password protection, HTTPS, IP filtering |
| Included Accessories | Mounting kit, quick guide, CD with software |
| Maintenance | Clean lens with soft dry cloth; keep vents unobstructed |
Frequently Asked Questions - LNP3020T LG
How do I connect the LNP3020T to my network?
Connect the camera to your router or switch using an Ethernet cable. Power the camera via PoE or the included adapter. Use the LG IP Setup Tool or scan the QR code on the camera to discover its IP address. Access the camera via web browser or the LG Smart Cam app.
Does the camera support wireless connection?
No, the LNP3020T is a wired camera with Ethernet connectivity only. It does not support Wi-Fi. For wireless use, consider a Wi-Fi bridge or powerline adapter.
How do I enable night vision?
Night vision is automatic. The camera has built-in IR LEDs that activate in low light. You can adjust the IR sensitivity in the camera settings via the web interface or app.
How do I set up motion detection?
Log in to the camera's web interface, go to Event Settings, and enable Motion Detection. You can draw detection zones and adjust sensitivity. You can also set up email alerts or FTP uploads.
What is the maximum microSD card supported?
The camera supports microSD cards up to 128 GB (Class 10 or higher). Insert the card into the slot on the camera's bottom panel. Format the card via the web interface before use.
How do I reset the camera to factory defaults?
Press and hold the reset button on the camera for 10 seconds using a paperclip. The camera will reboot and restore factory settings. The reset button is located near the cable connection.
Is the camera compatible with third-party NVRs?
Yes, the camera supports the ONVIF standard (Profile S) and can be used with many third-party NVRs and software. You may need to provide the ONVIF port (usually 8899) and credentials.
What power supply does the camera need?
The camera can be powered via Power over Ethernet (PoE, 802.3af) or a 12V DC adapter (1A, not included). PoE is recommended for simpler installation.
How do I view the camera remotely?
Install the LG Smart Cam app on your smartphone or tablet. Add the camera by scanning its QR code or entering the serial number. Ensure port forwarding is set up on your router for remote access.
What is the maximum video resolution?
The camera supports up to 1920x1080 at 30 fps. You can also set lower resolutions (720p, VGA) in the video settings to save bandwidth.
User questions about LNP3020T LG
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Security Camera in PDF format for free! Find your manual LNP3020T - LG and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. LNP3020T by LG.