CB11794 - Safe Barska - Free user manual and instructions
Find the device manual for free CB11794 Barska in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Electronic Safe |
| Brand | Barska |
| Model | CB11794 |
| Exterior Dimensions (approx.) | 12.6 x 8.3 x 8.3 inches (32 x 21 x 21 cm) |
| Interior Dimensions (approx.) | 11.8 x 7.9 x 7.9 inches (30 x 20 x 20 cm) |
| Weight | 22 lbs (10 kg) |
| Power Source | 4 AA batteries (not included) |
| Locking Mechanism | Digital keypad with override key |
| Number of User Codes | 1 master code + multiple user codes |
| Construction Material | Solid steel body |
| Door Thickness | 0.08 inches (2 mm) |
| Number of Locking Bolts | 2 live-locking bolts |
| Mounting Option | Pre-drilled holes for floor or wall mounting |
| Security Level | Basic home security |
| Battery Low Indicator | Yes, audible beep |
| Emergency Override | Key override (2 keys included) |
| Carpet Lining | Yes, removable shelf |
| Warranty | Limited lifetime warranty |
| Maintenance | Wipe with dry cloth; avoid moisture |
| Repair and Spare Parts | Contact Barska customer service |
Frequently Asked Questions - CB11794 Barska
How do I change the batteries?
Open the safe using the override key. Locate the battery compartment on the back of the door. Replace with 4 fresh AA batteries, ensuring correct polarity. Close the compartment and test the keypad.
What do I do if I forget the code?
Use the override key to open the safe. Inside, press the reset button (usually behind the battery compartment) to restore factory default code. Refer to the manual for default code.
How can I reset the safe to factory settings?
Open the safe with override key. Remove batteries. Press and hold the reset button for 5 seconds. Reinsert batteries and set a new master code following the instructions.
Can I mount this safe to the floor or wall?
Yes. The safe has pre-drilled holes on the back and bottom. Use appropriate anchors and screws (not included) to secure it to a concrete floor or wooden studs.
What is the default master code?
The default factory code is usually 159 or 000. Check the quick start guide or contact Barska support if it does not work.
How do I program a new user code?
Enter the current master code, press the program button (often inside the door or behind the battery cover), then enter a new 3-8 digit code followed by #. Confirm by re-entering. Refer to manual for exact steps.
What should I do if the safe beeps but won't open?
Check that the batteries are not low. Replace them if needed. Ensure you are entering the correct code. If still locked, use the override key. If the key fails, contact Barska support.
Is the safe fireproof?
This safe is not fire-rated. It is designed for theft prevention, not fire protection. Keep documents in a separate fireproof container if needed.
What is the warranty coverage?
Barska offers a limited lifetime warranty against defects in materials and workmanship. It does not cover damage from misuse, battery leakage, or forced entry.
Can I use rechargeable batteries?
Standard alkaline AA batteries are recommended. Rechargeable batteries may have lower voltage and cause erratic keypad behavior; avoid them.
User questions about CB11794 Barska
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Safe in PDF format for free! Find your manual CB11794 - Barska and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. CB11794 by Barska.
USER MANUAL CB11794 Barska
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Barska
Model : CB11794
Category : Safe