CHRYSAV - Audio/Video Interface Metra - Free user manual and instructions
Find the device manual for free CHRYSAV Metra in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Audio/Video Interface |
| Brand | Metra |
| Model | CHRYSAV |
| Compatible Vehicles | Select Chrysler models (e.g., 200, 300, Town & Country) |
| Dimensions (L x W x H) | 4.5 x 2.5 x 1.0 inches |
| Weight | 0.2 lbs (90 g) |
| Power Input | 12V DC (vehicle electrical system) |
| Power Consumption | < 1.5W |
| Operating Temperature | -20°C to 60°C (-4°F to 140°F) |
| Video Input | Composite (RCA) or factory harness |
| Video Output | Composite (RCA) to aftermarket radio |
| Audio Input | Factory speaker-level or RCA |
| Audio Output | RCA (front/rear) to aftermarket radio |
| Supported Video Formats | NTSC, PAL (auto-detect) |
| Supported Audio Formats | Analog stereo |
| Installation | Professional installation recommended; plug-and-play harness included |
| Maintenance | Wipe with dry cloth; avoid moisture |
| Safety | Disconnect battery before installation; avoid short circuits |
| Warranty | 1 year limited warranty |
| Package Contents | Interface module, wiring harness, instruction manual |
Frequently Asked Questions - CHRYSAV Metra
Which Chrysler vehicles are compatible with the Metra CHRYSAV interface?
The Metra CHRYSAV is designed for select Chrysler models including the 200, 300, Town & Country, and others with factory amplified systems. Check the Metra website for full compatibility list.
Will the interface retain factory features like steering wheel controls?
Yes, the CHRYSAV interface retains steering wheel audio controls, factory displays, and other features when used with compatible aftermarket radios.
Can I use the existing backup camera with this interface?
Yes, the interface supports factory backup cameras. You may need an additional adapter for certain vehicles. Connect the camera signal to the interface's video input.
How do I install the Metra CHRYSAV interface?
Disconnect the vehicle battery. Connect the interface harness between the factory wiring and the aftermarket radio. Follow the included manual for pin assignments. Professional installation is recommended.
What if I have no sound after installation?
Check all connections: ensure the interface's power (red, yellow) and ground (black) are correct. Verify speaker wires are not reversed. If the issue persists, reset the interface by disconnecting battery for 10 minutes.
Does the interface support aftermarket amplifiers?
Yes, the CHRYSAV provides RCA outputs that can be connected to amplifiers. You may need to configure the interface's output volume settings.
What is the power requirement for the interface?
The interface operates on 12V DC from the vehicle's electrical system. It draws less than 1.5W, so no external power supply is needed.
Can I use this interface with a non-Metra radio?
Yes, the CHRYSAV is compatible with most aftermarket radios that have standard RCA inputs and wiring. However, always check compatibility with your specific radio model.
How do I update the firmware on the interface?
The CHRYSAV does not have user-updatable firmware. For any updates, contact Metra support or visit your authorized dealer.
What should I do if the interface gets hot?
Ensure the interface is mounted in a well-ventilated area away from heat sources. If overheating persists, check for correct wiring connections. Discontinue use if excessive heat occurs and consult a professional installer.
User questions about CHRYSAV Metra
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Audio/Video Interface in PDF format for free! Find your manual CHRYSAV - Metra and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. CHRYSAV by Metra.