SA511CN2 - Smoke detector FIRST ALERT - Free user manual and instructions
Find the device manual for free SA511CN2 FIRST ALERT in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Smoke Detector |
| Model | SA511CN2 |
| Brand | First Alert |
| Power Source | 9V battery (included) |
| Sensor Type | Ionization |
| Dimensions | 4.8 x 4.8 x 1.5 inches (12.2 x 12.2 x 3.8 cm) |
| Weight | 0.5 lbs (0.23 kg) |
| Installation | Ceiling or wall mount via included bracket |
| Test Button | Press and hold to test alarm function |
| Silence Button | Hush feature to temporarily silence nuisance alarms |
| Alarm Sound | 85 dB at 10 feet |
| Battery Life | 1 year typical; low battery chirp indicator |
| Certifications | UL listed |
| Operating Temperature | 40°F to 100°F (4°C to 38°C) |
| Humidity Range | Up to 85% non-condensing |
| Cleaning | Vacuum dust from vents every 6 months |
| Battery Replacement | Replace 9V battery annually or when chirps |
| End of Life | 10-year lifespan; replace unit after 10 years |
| Warranty | Limited 10-year warranty |
Frequently Asked Questions - SA511CN2 FIRST ALERT
Where should I install the SA511CN2 smoke detector?
Install on the ceiling or high on a wall, at least 4 inches from corners. For multi-level homes, place one detector on each floor, including the basement. Avoid bathrooms, kitchens (to reduce false alarms), and near windows or vents.
How do I test the smoke detector?
Press and hold the test button for 5 seconds. The alarm should sound loudly. If it does not, replace the battery or the unit. Test weekly.
What does a chirping sound mean?
A chirp every 30-60 seconds indicates a low battery. Replace the 9V battery immediately. If chirping continues after battery change, the unit may be at end of life (10 years) or malfunctioning.
How do I silence a false alarm?
Press the Hush button to temporarily silence the alarm for 8-15 minutes. The detector will automatically reset. If false alarms persist, relocate the unit away from sources like steam from showers or cooking smoke.
How often should I replace the battery?
Replace the 9V battery at least once a year, or immediately when the low-battery chirp begins. We recommend changing batteries when you change clocks for daylight saving time.
How do I clean the smoke detector?
Vacuum the vent openings gently with a soft brush attachment every 6 months to remove dust and debris. Do not use water, cleaners, or spray near the unit.
What is the lifespan of the SA511CN2?
The detector has a 10-year lifespan from the date of manufacture. Replace the entire unit after 10 years. Check the manufacture date on the back of the unit.
Can I interconnect multiple SA511CN2 detectors?
No, the SA511CN2 is a standalone unit and does not support interconnection. For interconnected alarms, consider First Alert models with hardwire or wireless interconnect capability.
What should I do when the alarm sounds?
If the alarm sounds and you are not testing, immediately evacuate the building. Follow your emergency escape plan. Do not assume it is a false alarm. Once safely outside, call 911.
Is the SA511CN2 suitable for use in an RV or mobile home?
Yes, it can be used in RVs and mobile homes. However, ensure it is installed away from extreme temperatures and direct sunlight. Check local codes for requirements.
User questions about SA511CN2 FIRST ALERT
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Smoke detector in PDF format for free! Find your manual SA511CN2 - FIRST ALERT and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. SA511CN2 by FIRST ALERT.
USER MANUAL SA511CN2 FIRST ALERT
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : FIRST ALERT
Model : SA511CN2
Category : Smoke detector