EcoBreeze ACECFR20200SE3 - Cooling system SCHNEIDER - Free user manual and instructions
Find the device manual for free EcoBreeze ACECFR20200SE3 SCHNEIDER in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Portable Cooling System (Evaporative Cooler / Air Conditioner) |
| Brand | Schneider |
| Model | EcoBreeze ACECFR20200SE3 |
| Dimensions (W x D x H) | 33 cm x 33 cm x 72 cm |
| Weight | 18 kg |
| Power Supply | 220-240 V, 50 Hz |
| Power Consumption | 1200 W (cooling mode) |
| Cooling Capacity | 14000 BTU/h |
| Water Tank Capacity | 40 L (for evaporative cooling) |
| Air Flow Rate | 250 m³/h |
| Noise Level | 55 dB (max speed) |
| Operating Modes | Cooling, Fan, Dehumidifier |
| Speed Settings | 3 speeds (Low, Medium, High) |
| Remote Control | Yes (included) |
| Timer | Up to 24 hours |
| Filter Type | Washable honeycomb cooling pad |
| Maintenance | Clean water tank and filter every 2 weeks |
| Safety Features | Overheat protection, auto shut-off when water level low |
| Spare Parts Available | Cooling pads, remote control, water pump |
| Warranty | 2 years |
Frequently Asked Questions - EcoBreeze ACECFR20200SE3 SCHNEIDER
How do I install the EcoBreeze ACECFR20200SE3?
Place the unit on a flat surface near a window for exhaust. Connect the exhaust hose to the back and secure it in the window. Plug into a grounded outlet. Fill the water tank if using evaporative mode.
How often should I clean the filter?
Clean the honeycomb cooling pad every two weeks with mild detergent and water. Rinse thoroughly and let dry before reinstalling.
Why is the unit not cooling effectively?
Check if the water tank is filled, the filter is clean, and the exhaust hose is not blocked. Also ensure the room is not too large for the cooling capacity (max 30 m²).
Can I use the remote control without batteries?
No, the remote requires two AAA batteries (not included). Replace them when the remote stops responding.
How do I drain the water tank?
Locate the drain plug at the bottom or back of the unit. Place a shallow pan under it, remove the plug, and let the water drain completely. Reinstall the plug tightly.
What does the timer function do?
The timer allows you to set the unit to turn on or off automatically after a programmed time (1-24 hours). Press the Timer button and use +/- to adjust.
Is the unit safe to leave unattended?
Yes, it has overheat protection and an auto shut-off when the water level is too low. However, we recommend turning it off when leaving for extended periods.
Where can I buy spare parts?
Spare parts like cooling pads, remote controls, and water pumps are available on the Schneider website or authorized dealers. Use the model number ACECFR20200SE3.
How do I switch between cooling and fan mode?
Press the Mode button until the desired icon appears on the display. Cooling uses water; Fan blows air without cooling; Dehumidifier reduces humidity.
What is the noise level?
The noise level is approximately 55 dB on high speed, similar to a normal conversation. Lower speeds are quieter.
User questions about EcoBreeze ACECFR20200SE3 SCHNEIDER
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Cooling system in PDF format for free! Find your manual EcoBreeze ACECFR20200SE3 - SCHNEIDER and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. EcoBreeze ACECFR20200SE3 by SCHNEIDER.
USER MANUAL EcoBreeze ACECFR20200SE3 SCHNEIDER
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : SCHNEIDER
Model : EcoBreeze ACECFR20200SE3
Category : Cooling system