CS-PRS3 - Rear Camera CRUX - Free user manual and instructions
Find the device manual for free CS-PRS3 CRUX in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Rear View Camera |
| Brand | CRUX |
| Model | CS-PRS3 |
| Video Resolution | 480p (standard definition) |
| Viewing Angle | 170 degrees |
| Night Vision | Yes, with IR LEDs |
| Waterproof Rating | IP68 |
| Power Supply | 12V DC |
| Current Draw | 0.3A |
| Video Output | Composite RCA |
| Mirror Image | Selectable via switch |
| Parking Guidelines | Adjustable |
| Dimensions | 2.5 x 1.5 x 1.0 inches |
| Weight | 0.2 lbs |
| Mounting Bracket | Included |
| Cable Length | 16 feet |
| Operating Temperature | -4°F to 140°F |
| Certification | CE, FCC |
Frequently Asked Questions - CS-PRS3 CRUX
How do I install the CRUX CS-PRS3 rear camera?
Install the camera by mounting it on the rear of your vehicle using the included bracket. Connect the video cable to your aftermarket stereo or monitor. Wire the power lead to the reverse light circuit for automatic activation.
Where should I mount the camera on my vehicle?
Mount the camera above the license plate or on the rear bumper for a clear view. Ensure the camera is level and not obstructed by the license plate or trunk handle.
How do I connect the camera to the reverse light?
Locate the positive wire of your reverse light. Connect the red power wire of the camera to this wire using a splice connector. Connect the black ground wire to a metal chassis ground.
Is the CS-PRS3 compatible with any aftermarket stereo?
The camera outputs a standard composite video signal (RCA), so it is compatible with any aftermarket stereo or monitor that has a composite video input.
Does the camera come with a monitor?
No, the CS-PRS3 is a camera only. You need a separate monitor or a car stereo with a video input to view the camera feed.
How do I adjust the parking guidelines?
The camera has a small toggle switch or button to enable/disable parking guidelines. Some models also allow adjusting the line position via a potentiometer. Refer to the manual for specific adjustments.
Is the camera waterproof?
Yes, the CRUX CS-PRS3 has an IP68 waterproof rating, meaning it is dust-tight and can be submerged in water up to 1.5 meters for 30 minutes.
Does it have night vision?
Yes, the camera is equipped with infrared LEDs for night vision, providing clear visibility in low-light conditions.
What is the warranty on this camera?
CRUX offers a 1-year limited warranty from the date of purchase against defects in materials and workmanship.
I am not getting any picture on my monitor. What could be wrong?
Check all connections: ensure the RCA cable is fully plugged into the monitor and camera. Verify the power connections: the red wire must get 12V when reverse is engaged. Test the monitor with another source. If still no picture, the camera may be defective.
User questions about CS-PRS3 CRUX
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Rear Camera in PDF format for free! Find your manual CS-PRS3 - CRUX and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. CS-PRS3 by CRUX.
USER MANUAL CS-PRS3 CRUX
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : CRUX
Model : CS-PRS3
Category : Rear Camera