POAW 44 - Receiver HILTI - Free user manual and instructions
Find the device manual for free POAW 44 HILTI in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Receiver for rotary lasers |
| Brand | Hilti |
| Model | POAW 44 |
| Dimensions (L x W x H) | 150 x 80 x 30 mm |
| Weight | 0.2 kg |
| Power Supply | 2 x AA batteries |
| Detection Range (diameter) | Up to 100 m |
| Accuracy | ±1 mm |
| Indication | Audio and visual (LED) |
| Protection Class | IP54 |
| Operating Temperature | -20°C to +50°C |
| Material | ABS plastic |
| Color | Red/Black |
| Display | LED for status |
| Buttons | On/Off, Mode selection |
| Sensing Method | Photodiode array |
| Mounting | Clamp for grade rod |
| Compatible Lasers | Hilti PR 30, PR 40 series |
| Maintenance | Clean with dry cloth |
| Safety Classification | Laser Class 2 |
Frequently Asked Questions - POAW 44 HILTI
How do I turn on the Hilti POAW 44 receiver?
Press and hold the On/Off button for 2 seconds. The LED will light up indicating the device is active.
What batteries does the POAW 44 use?
It uses 2 x AA alkaline batteries. Replace them when the LED flashes red or the audio signal weakens.
What is the maximum range of the POAW 44?
The receiver can detect laser beams up to a diameter of 100 m under optimal conditions.
How accurate is the Hilti POAW 44?
It provides ±1 mm accuracy for precise alignment tasks.
Which lasers are compatible with the POAW 44?
It is compatible with Hilti rotary lasers such as the PR 30 and PR 40 series.
How do I clean the receiver?
Use a soft, dry cloth to wipe the exterior. Do not use solvents or water.
What does the flashing LED mean?
A flashing red LED indicates low battery. Replace batteries promptly. A steady green LED indicates normal operation.
Can the receiver be used outdoors?
Yes, it has an IP54 protection rating, meaning it is dust and splash water resistant.
How do I mount the POAW 44?
Attach the clamp to a grade rod or similar support. Tighten the knob to secure it.
What should I do if the receiver does not detect the laser?
Check the battery level and ensure the laser is within range. Clean the sensor window with a dry cloth and try again.
User questions about POAW 44 HILTI
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Receiver in PDF format for free! Find your manual POAW 44 - HILTI and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. POAW 44 by HILTI.
USER MANUAL POAW 44 HILTI
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : HILTI
Model : POAW 44
Category : Receiver