VR-670 - Home Theater SHERWOOD - Free user manual and instructions
Find the device manual for free VR-670 SHERWOOD in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Home Theater AV Receiver |
| Brand | Sherwood |
| Model | VR-670 |
| Dimensions (W x H x D) | 17.1 x 6.1 x 15.0 inches (435 x 155 x 380 mm) |
| Weight | 24.3 lbs (11.0 kg) |
| Power Supply | AC 120V, 60Hz |
| Power Consumption | 500W (standby: 0.5W) |
| Amplifier Output | 100W per channel (8 ohms, 20Hz-20kHz, 0.08% THD) |
| Supported Audio Formats | Dolby Digital, DTS, PCM, MP3, WMA |
| Video Inputs | 4 HDMI, 3 Component, 4 Composite, 1 S-Video |
| Video Outputs | 1 HDMI, 1 Component, 1 Composite |
| Audio Inputs | 4 Optical, 3 Coaxial, 7 Analog RCA |
| Speaker Terminals | 7.2 channel (binding posts) |
| Radio Tuner | FM/AM with 30 presets |
| Remote Control | Included (IR) |
| User Interface | On-screen display (OSD) and front panel buttons |
| Cleaning Instructions | Wipe with dry cloth; avoid liquids and abrasives |
| Safety Certifications | UL, FCC, CE |
| Spare Parts Availability | Contact Sherwood customer service or authorized dealers |
Frequently Asked Questions - VR-670 SHERWOOD
How do I connect my TV to the Sherwood VR-670?
Use an HDMI cable to connect the HDMI OUT port on the receiver to an HDMI IN port on your TV. Ensure the receiver is set to the correct input source.
Why is there no sound from the speakers?
Check that the speaker wires are securely connected to the receiver and speakers. Verify the receiver is turned on and the volume is not muted. Also, confirm the correct input source is selected.
How do I reset the VR-670 to factory settings?
Press and hold the Power button on the front panel while turning the unit on. Continue holding until 'CLEAR' appears on the display, then release.
Can I use the VR-670 to play music from my smartphone?
Yes, connect your smartphone via Bluetooth (if supported) or use an auxiliary cable to the AUDIO IN jack. Select the corresponding input on the receiver.
How do I set up the FM/AM radio?
Connect the included FM and AM antennas. Press Tuner on the remote, then use the TUNING buttons to search for stations. Press MEMORY and preset number to save.
What is the maximum power output per channel?
The VR-670 delivers 100 watts per channel at 8 ohms, with 0.08% total harmonic distortion from 20Hz to 20kHz.
Why does the unit turn off unexpectedly?
This may be due to overheating. Ensure proper ventilation around the receiver. If the problem persists, check for speaker wire shorts or reduce volume level.
How do I update the firmware?
The VR-670 does not support firmware updates via USB or network. Check Sherwood's website for any available updates or contact support.
Can I use speakers with lower impedance?
Yes, the VR-670 supports speakers from 4 to 16 ohms. However, using 4 ohm speakers may require higher current; avoid driving multiple 4 ohm speakers simultaneously at high volume.
How do I clean the receiver?
Use a soft, dry cloth to wipe the surface. Do not use any liquids, chemicals, or abrasive cleaners. Ensure the unit is unplugged before cleaning.
User questions about VR-670 SHERWOOD
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Home Theater in PDF format for free! Find your manual VR-670 - SHERWOOD and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. VR-670 by SHERWOOD.
USER MANUAL VR-670 SHERWOOD
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : SHERWOOD
Model : VR-670
Category : Home Theater