EA3601F35B - Saw MAKITA - Free user manual and instructions
Find the device manual for free EA3601F35B MAKITA in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Circular Saw |
| Brand | Makita |
| Model | EA3601F35B |
| Blade Diameter | 190 mm (7-1/2 inches) |
| Power Source | Electric Corded |
| Voltage | 220-240 V ~ 50 Hz |
| Power Consumption | 1500 W |
| No Load Speed | 5200 rpm |
| Max Cutting Depth at 90° | 64 mm |
| Max Cutting Depth at 45° | 43 mm |
| Weight | 4.5 kg |
| Dimensions (L x W x H) | 315 x 245 x 280 mm |
| Key Functions | Bevel cuts (0-45°), depth adjustment, dust extraction, ergonomic handle |
| Maintenance | Clean dust ports, inspect brushes, lubricate gears periodically |
| Safety Features | Electric brake, lock-off button, blade guard, anti-kickback |
| Spare Parts & Repair | Blades, carbon brushes, power cord, switch assembly available |
| General Information | Complies with EN 60745; suitable for wood, plastics, and soft metals |
Frequently Asked Questions - EA3601F35B MAKITA
How do I change the blade on the Makita EA3601F35B?
Unplug the saw. Press the shaft lock and use the supplied wrench to loosen the blade bolt. Remove the outer flange, old blade, and install new blade with teeth facing forward. Tighten bolt securely.
What blade size does this saw use?
It uses a 190 mm (7-1/2 inch) diameter blade with a 20 mm arbor hole.
Can I make bevel cuts with this saw?
Yes, the saw features a bevel adjustment from 0° to 45° with positive stops at common angles.
How do I adjust the cutting depth?
Loosen the depth adjustment lever located near the base plate. Set the desired depth by aligning the scale, then tighten the lever.
What is the maximum cutting depth at 90 degrees?
The maximum cutting depth at 90° is 64 mm (2-1/2 inches).
Does the saw have an electric brake?
Yes, it is equipped with an electric brake that stops the blade quickly when the trigger is released.
How do I connect a vacuum for dust extraction?
Attach a vacuum hose to the dust port on the rear of the saw. Use an adapter if necessary. The port fits standard 35 mm hoses.
What type of power cord does it use?
It comes with a 2.5 m (8 ft) rubber power cord with a molded plug suitable for 220-240 V outlets.
How often should I replace the carbon brushes?
Check brushes every 50 hours of use. Replace if they are worn to less than 6 mm length. Use Makita genuine brushes (part number 421083-9).
Is the saw suitable for cutting metal?
It can cut soft metals like aluminum with appropriate carbide-tipped blades, but not steel. Always use the correct blade and follow safety precautions.
User questions about EA3601F35B MAKITA
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Saw in PDF format for free! Find your manual EA3601F35B - MAKITA and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. EA3601F35B by MAKITA.
USER MANUAL EA3601F35B MAKITA
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : MAKITA
Model : EA3601F35B
Category : Saw