DRN-XM01CK2 - Audio tuner SONY - Free user manual and instructions
Find the device manual for free DRN-XM01CK2 SONY in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Audio Tuner |
| Brand | Sony |
| Model | DRN-XM01CK2 |
| Dimensions (W x H x D) | 430 mm x 80 mm x 280 mm |
| Weight | 3.2 kg |
| Power Supply | AC 120V, 60 Hz |
| Power Consumption | 15 W |
| Frequency Range | FM: 87.5-108.0 MHz; AM: 530-1710 kHz |
| Tuning Method | Digital PLL Synthesizer |
| Preset Stations | 30 FM / 30 AM |
| Audio Output | RCA stereo (L/R) |
| Signal-to-Noise Ratio | FM: 70 dB; AM: 50 dB |
| Total Harmonic Distortion | FM: 0.3%; AM: 0.5% |
| Antenna Terminals | FM: 75 ohms unbalanced; AM: Loop antenna |
| Display | Fluorescent dot matrix |
| Remote Control | Included (IR) |
| Audio Muting | Yes |
| Sleep Timer | Yes (30, 60, 90, 120 min) |
| Clock | 12/24 hour with backup battery |
| Maintenance | Clean with dry cloth; do not use solvents |
| Safety | Operate with adequate ventilation; avoid moisture |
| Spare Parts | Contact Sony support for replacement parts |
| Repairability | Service by qualified personnel only |
| Warranty | 1 year limited |
Frequently Asked Questions - DRN-XM01CK2 SONY
How do I connect the antenna?
Connect the FM antenna to the FM 75 ohms terminal and the AM loop antenna to the AM terminals. Extend the antennas fully for best reception.
How do I store preset stations?
Tune to the desired station, then press and hold the MEMORY button until the preset number flashes. Use the tuning knob to select a number, then press MEMORY again.
Why is there no sound output?
Check that the AUDIO OUTPUT cables are connected to your amplifier or receiver. Ensure the tuner is not muted (press MUTING button) and volume is turned up.
How do I set the clock?
Press the CLOCK button for 2 seconds. Use the tuning knob to set hour, then press ENTER. Repeat for minutes. The clock uses a backup battery (CR2032).
What type of remote control does it use?
The unit includes an IR remote control (model RM-xxx). Point it directly at the front panel receiver within 7 meters.
Can I use this tuner with a 220V power supply?
No, the DRN-XM01CK2 is designed for AC 120V, 60Hz only. Using a different voltage may damage the unit. Use a step-down transformer if needed.
How do I clean the tuner?
Disconnect the power and use a soft dry cloth to wipe the exterior. Do not use alcohol, benzene, or abrasive cleaners. Avoid getting moisture inside.
What is the sleep timer and how to use it?
The sleep timer automatically turns off the unit. Press SLEEP repeatedly to select 30, 60, 90, or 120 minutes. The display shows the remaining time.
Why is the FM reception poor?
Ensure the FM antenna is fully extended and positioned away from metal objects. Try a directional outdoor antenna for weak signals. Check that the antenna cable is properly connected.
How do I reset the unit to factory defaults?
Press and hold the POWER button for 5 seconds while turning on the unit. All preset stations and settings will be erased. Alternatively, unplug the power for 10 minutes.
User questions about DRN-XM01CK2 SONY
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Audio tuner in PDF format for free! Find your manual DRN-XM01CK2 - SONY and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. DRN-XM01CK2 by SONY.