790.49613 - Oven KENMORE - Free user manual and instructions
Find the device manual for free 790.49613 KENMORE in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Built-In Electric Oven |
| Brand | Kenmore |
| Model | 790.49613 |
| Oven Capacity | 5.0 cu. ft. |
| Width | 30 inches |
| Depth | 26 inches |
| Height | 28 inches |
| Power Source | 240V / 60 Hz |
| Cooking Modes | Bake, Broil, Convection Bake, Convection Roast, Keep Warm |
| Cleaning Mode | Self-Clean |
| Control Type | Electronic touch with digital display |
| Oven Light | Yes, replaceable halogen bulb |
| Safety Features | Auto shut-off, child lock, temperature sensor |
| Racks | 2 full-width racks |
| Weight | 130 lbs |
| Warranty | 1 year limited parts and labor |
| Repairability | Replaceable heating elements, control board, door hinge |
| Energy Efficient | Convection mode reduces energy usage |
Frequently Asked Questions - 790.49613 KENMORE
How do I preheat the Kenmore 790.49613 oven?
Press the BAKE button, then use the number pads to set the desired temperature, and press START. The oven will preheat and beep when ready.
What does the self-clean cycle do and how do I use it?
The self-clean cycle heats the oven to high temperatures to burn off spills. To use: remove all racks, close the door, press SELF CLEAN, select duration (2-4 hours), and press START. The door locks automatically.
Why is my oven not heating or not reaching the set temperature?
Possible causes include a faulty heating element, temperature sensor, or control board. Verify power supply and ensure the oven is not in a demo mode.
How do I change the oven light bulb?
Disconnect power. Remove the light cover by turning it counterclockwise. Replace with a halogen bulb (typically 40W, G9 base). Reinstall cover and restore power.
Can I use aluminum foil in the oven?
Yes, but avoid covering the entire rack or blocking airflow. Do not use foil on the oven bottom as it can cause damage and affect heat distribution.
How do I calibrate the oven temperature?
Press and hold BAKE for 3 seconds. The display shows '00'. Use the number pads to adjust ±35°F. Press START to save.
What is the door lock feature?
Activate Control Lock to prevent accidental operation. Press and hold LOCK for 3 seconds. A lock icon appears. Repeat to unlock.
How do I replace the oven heating element?
Disconnect power. Remove the defective element by unscrewing the mounting screws. Disconnect wires and install the new element. Refer to the manual for exact part number.
What do error codes F1, F2, etc. mean?
F1 indicates a control board fault; F2 indicates a temperature sensor problem. Try resetting by disconnecting power for 1 minute. If it persists, contact service.
How do I clean the oven door glass?
Use a non-abrasive glass cleaner or a mixture of vinegar and water. Avoid using harsh chemicals that could damage the glass seal.
User questions about 790.49613 KENMORE
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Oven in PDF format for free! Find your manual 790.49613 - KENMORE and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. 790.49613 by KENMORE.
USER MANUAL 790.49613 KENMORE
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : KENMORE
Model : 790.49613
Category : Oven