Heat Line - Uncategorized ZODIAC - Free user manual and instructions
Find the device manual for free Heat Line ZODIAC in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Heat pump pool heater |
| Brand | Zodiac |
| Model | Heat Line |
| Heating Capacity | 11 kW (37,500 BTU/h) |
| Pool Size Range | Up to 40 m³ (10,500 gallons) |
| Dimensions (L x W x H) | 850 x 620 x 700 mm |
| Weight | 45 kg |
| Power Supply | 230 V / 50 Hz single phase |
| Rated Current | 10 A |
| Compressor Type | Rotary hermetic |
| Refrigerant | R32 |
| Operating Temperature Range | -10°C to 43°C |
| Water Flow Rate | 3.5 m³/h (15.4 GPM) |
| Connection Size | 50 mm (2 inch) PVC |
| Control Panel | Digital LCD with adjustable thermostat |
| Functions | Heating, freeze protection, timer |
| Energy Efficiency | COP up to 5.5 at 27°C air / 27°C water |
| Noise Level | < 60 dB(A) |
| Maintenance | Clean air filter monthly; check Titanium heat exchanger annually |
| Safety Features | High-pressure switch, low-pressure switch, anti-scaling protection |
| Spare Parts | Fan motor, compressor, control board, sensors (available from Zodiac) |
| Repairability | Modular design with accessible components; service manual available |
| Warranty | 2 years (extended available) |
| Certifications | CE, UKCA, RoHS |
Frequently Asked Questions - Heat Line ZODIAC
What is the ideal water temperature for the pool?
The Zodiac Heat Line can heat the pool to a maximum of 40°C. A comfortable swimming temperature is typically between 26°C and 28°C.
How do I install the heater?
Installation requires a level base, proper plumbing connections (50 mm PVC), and electrical supply (230 V / 10 A). Ensure sufficient airflow around the unit. Refer to the manual for detailed steps.
What maintenance is required?
Clean the air filter every month during use. Inspect the Titanium heat exchanger annually for scaling. Check refrigerant pressure every two years by a qualified technician.
Can the heater be used in winter?
Yes, but only if the ambient temperature is above -10°C. The heat pump has a freeze protection function that activates when water temperature drops below 5°C.
Why does the heater stop and start frequently?
This may be due to a dirty filter, low refrigerant, or improper thermostat setting. First, clean the air filter. If the issue persists, contact Zodiac support.
What does error code E3 mean?
Error E3 indicates a high-pressure switch fault. Turn off the unit, check for blocked airflow or water flow, and restart after 10 minutes. Consult the manual for reset.
How do I winterize the heat pump?
In freezing climates, drain the water from the heat exchanger, disconnect PVC pipes, and cover the unit. Store in a dry, frost-free place if possible.
Is the heater compatible with saltwater pools?
Yes, the Titanium heat exchanger resists corrosion from salt and chlorine. However, avoid high salt concentrations above 5000 ppm.
How long does it take to heat the pool?
Heating time depends on pool size, starting temperature, and weather. For a 40 m³ pool, expect a rise of 1°C per hour at 27°C ambient.
Where can I download the user manual?
The manual is available on notice-facile.com in PDF format. Search for Zodiac Heat Line. You can also request a translated version via email.
User questions about Heat Line ZODIAC
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Uncategorized in PDF format for free! Find your manual Heat Line - ZODIAC and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. Heat Line by ZODIAC.
USER MANUAL Heat Line ZODIAC
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : ZODIAC
Model : Heat Line
Category : Uncategorized