AP-2500D - Air purifier XPower - Free user manual and instructions
Find the device manual for free AP-2500D XPower in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Air Purifier |
| Brand | XPower |
| Model | AP-2500D |
| Dimensions (H x W x D) | 20.5 x 20.5 x 50.0 cm |
| Weight | 5.2 kg |
| Power Supply | 220-240 V, 50/60 Hz |
| Power Consumption | 60 W |
| Coverage Area | Up to 30 m² |
| CADR (Dust) | 200 m³/h |
| Filter Type | HEPA + Activated Carbon |
| Filter Replacement | Every 6-12 months |
| Fan Speeds | 3 (Low, Medium, High) |
| Noise Level | 30 - 50 dB |
| Control Type | Touch Panel + Remote Control |
| Timer Function | 1-8 hours |
| Sleep Mode | Yes |
| Air Quality Indicator | PM2.5 Sensor with LED Display |
| Auto Mode | Yes |
| Filter Reset Reminder | Yes |
| Maintenance | Clean pre-filter every 2 weeks |
| Safety Features | Automatic shut-off when front cover is removed |
| Spare Parts Available | Yes (HEPA filter, carbon filter, remote) |
| Warranty | 2 years |
Frequently Asked Questions - AP-2500D XPower
How often should I replace the filters?
The HEPA and activated carbon filters should be replaced every 6 to 12 months, depending on usage and air quality. The filter replacement indicator will alert you when it's time.
Can I wash the HEPA filter?
No, the HEPA filter is not washable. Only the pre-filter can be cleaned with a vacuum or rinsed with water and dried completely. Replace the HEPA filter as recommended.
What is the coverage area for this model?
The XPower AP-2500D is designed for rooms up to 30 m², providing effective air purification for medium-sized rooms.
Does the purifier have a timer function?
Yes, it features a programmable timer that allows you to set operation from 1 to 8 hours.
Is the air purifier noisy?
The noise level ranges from 30 dB (sleep mode) to 50 dB (high speed). It’s quiet enough for use in bedrooms.
How do I connect the remote control?
The remote control is pre-paired. Simply point it at the sensor on the unit and press the desired button. If not responding, replace the batteries.
What does the air quality indicator show?
The built-in PM2.5 sensor measures particulate matter and displays the air quality via a color-coded LED: blue (good), yellow (moderate), red (poor).
Can I use the purifier 24/7?
Yes, it is designed for continuous operation. However, power consumption is 60W, so running it all day is energy-efficient. Turn off when not needed to extend filter life.
How do I reset the filter replacement indicator?
After replacing the filters, press and hold the timer button for 5 seconds until the indicator light turns off.
The unit is not turning on. What should I check?
Ensure the power cord is securely plugged into a working outlet. Check that the front cover is properly closed (safety switch). If it still doesn’t turn on, contact customer support.
User questions about AP-2500D XPower
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Air purifier in PDF format for free! Find your manual AP-2500D - XPower and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. AP-2500D by XPower.
USER MANUAL AP-2500D XPower
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : XPower
Model : AP-2500D
Category : Air purifier