SWRHK-65Q - Uncategorized CRUX - Free user manual and instructions
Find the device manual for free SWRHK-65Q CRUX in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Steering Wheel Control Interface |
| Brand | CRUX |
| Model | SWRHK-65Q |
| Compatible Vehicles | Honda and Acura models with 20-pin or 28-pin radio connector (2006-2011) |
| Input | Factory steering wheel control wires |
| Output | 3.5 mm jack for aftermarket radio (wired remote input) |
| Power Supply | 12V DC (vehicle electrical system) |
| Dimensions (L x W x H) | 2.5 x 1.5 x 0.8 inches (approx.) |
| Weight | 0.1 lbs (approx.) |
| Installation Type | Plug-and-play, solderless (requires wire crimps or T-taps) |
| Supported Functions | Volume up/down, track seek, mode, answer/hang up (phone) |
| Cable Length | 12 inches (approx.) |
| Operating Temperature | -4°F to 158°F (-20°C to 70°C) |
| Compatible Aftermarket Radios | Most brands with 3.5mm wired remote input (Pioneer, Kenwood, Sony, Alpine, JVC, etc.) |
| Manual Included | Yes (downloadable PDF) |
Frequently Asked Questions - SWRHK-65Q CRUX
What does the CRUX SWRHK-65Q do?
The SWRHK-65Q is a steering wheel control interface that retains factory steering wheel buttons when installing an aftermarket radio in select Honda and Acura vehicles.
Which vehicles are compatible with this interface?
It is compatible with Honda and Acura models from approximately 2006 to 2011 that have a 20-pin or 28-pin radio connector, such as Civic, Accord, CR-V, and TL.
How do I connect the SWRHK-65Q?
Connect the interface between the vehicle's wiring harness and the aftermarket radio. The SWRHK-65Q uses a 3.5mm jack to plug into the radio's wired remote input. You may need to connect power, ground, and SWC wires.
Do I need to program the interface?
No, the SWRHK-65Q is pre-programmed for most Honda/Acura vehicles. However, you may need to perform a reset sequence (press and hold a button) to sync with the radio.
What if my steering wheel buttons don't work after installation?
Check all connections, ensure the 3.5mm plug is fully inserted, and verify the radio's steering wheel control settings are enabled. If issues persist, consult the manual or contact CRUX support.
Does this interface support phone buttons?
Yes, it supports answer/hang up functions if your vehicle's steering wheel has a phone button and the aftermarket radio supports it.
Can I use this with any aftermarket radio?
It works with most radios that have a 3.5mm wired remote input, including brands like Pioneer, Kenwood, Sony, Alpine, and JVC. Check your radio's manual to confirm.
Is the installation reversible?
Yes, the interface is plug-and-play and can be removed without permanent modifications to the vehicle's wiring if you use solderless connectors.
Where can I find the manual for the SWRHK-65Q?
The manual is available as a free PDF download on the CRUX website or from the Notice Facile page where you found this information.
What is the warranty on this product?
CRUX typically offers a 1-year limited warranty against defects. Contact CRUX customer service for details and claims.
User questions about SWRHK-65Q CRUX
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Uncategorized in PDF format for free! Find your manual SWRHK-65Q - CRUX and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. SWRHK-65Q by CRUX.
USER MANUAL SWRHK-65Q CRUX
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : CRUX
Model : SWRHK-65Q
Category : Uncategorized