FB-SM-V2 - Uncategorized Angler - Free user manual and instructions
Find the device manual for free FB-SM-V2 Angler in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Electronic device |
| Brand | Angler |
| Model | FB-SM-V2 |
| Dimensions (L x W x H) | 150 x 80 x 30 mm |
| Weight | 200 g |
| Power Supply | 4 x AA batteries (not included) |
| Battery Life | Up to 20 hours |
| Display | LCD screen, 2.4" monochrome |
| Main Functions | Depth measurement, fish detection, water temperature |
| Operating Temperature | -10°C to 50°C |
| Water Resistance | IPX7 (submersible up to 1m) |
| Included Accessories | Mounting bracket, transducer, manual |
| Maintenance | Clean with damp cloth; avoid solvents |
| Safety Instructions | Keep away from children; do not disassemble |
| Spare Parts Availability | Transducer, battery compartment cover available |
| Repairability | Moderate; refer to manual for spare parts |
| Certification | CE, RoHS |
Frequently Asked Questions - FB-SM-V2 Angler
How do I install the batteries?
Open the battery compartment on the back, insert 4 AA batteries with correct polarity, then close the cover securely. Use alkaline batteries for best performance.
How do I mount the device?
Use the included mounting bracket to attach the device to a boat or kayak. Ensure it is securely fastened and the transducer is submerged in water for accurate readings.
What does the display show?
The LCD screen displays depth, fish icons, and water temperature. The backlight can be toggled for low-light conditions.
How to interpret depth readings?
Depth is shown in meters or feet. The device uses sonar pulses to measure distance to the bottom. A steady reading indicates consistent depth; fluctuations may indicate underwater structures.
Can I use it in saltwater?
Yes, the device is rated IPX7 and can be used in saltwater. Rinse with fresh water after each use to prevent corrosion.
How to clean the transducer?
Gently wipe the transducer with a soft damp cloth. Do not use abrasive cleaners or solvents. Ensure the transducer surface is free of residue for accurate readings.
Why is the screen blank?
Check battery installation and polarity. Replace batteries if low. Press the power button. If still blank, ensure the transducer cable is properly connected.
How to update the firmware?
Firmware updates are available on the Angler support website. Download the file, copy to a microSD card, insert into device slot, and follow prompted instructions.
Is it compatible with other Angler devices?
This model is designed to be a standalone unit. It can share data via NMEA 0183 protocol with compatible Angler GPS units or chartplotters.
Where can I get spare parts?
Spare parts like transducer, battery cover, and mounting hardware are available from Angler authorized dealers or the official website. Use model number FB-SM-V2 when ordering.
User questions about FB-SM-V2 Angler
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Uncategorized in PDF format for free! Find your manual FB-SM-V2 - Angler and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. FB-SM-V2 by Angler.
USER MANUAL FB-SM-V2 Angler
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Angler
Model : FB-SM-V2
Category : Uncategorized