UT08A - Measurement Uni-T - Free user manual and instructions
Find the device manual for free UT08A Uni-T in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Digital Multimeter |
| Brand | Uni-T |
| Model | UT08A |
| Category | Measurement |
| Display | LCD, 3 1/2 digits (2000 counts) |
| DC Voltage Range | 200mV to 600V |
| AC Voltage Range | 200V to 600V |
| DC Current Range | 200µA to 10A |
| Resistance Range | 200Ω to 20MΩ |
| Additional Functions | Continuity test, diode test, battery test |
| Safety Rating | CAT II 600V |
| Power Supply | 2× AA batteries (1.5V) |
| Dimensions (approx.) | 130mm × 70mm × 30mm |
| Weight (approx.) | 180g (including batteries) |
| Accessories Included | Test leads, batteries, user manual |
| Cleaning | Wipe with dry cloth; avoid solvents |
| Repairability | No user-serviceable parts; contact support |
Frequently Asked Questions - UT08A Uni-T
How do I measure DC voltage with the UT08A?
Turn the rotary switch to the DCV position. Connect the black test lead to COM and red to VΩmA. Touch the probes to the circuit. Read the value on the LCD.
What is the maximum current I can measure?
The UT08A can measure up to 10A DC. For currents above 200mA, use the 10A input jack.
How do I test continuity?
Turn the dial to the continuity/beep symbol. Connect probes as usual. If the resistance is low (< 30Ω), the meter will beep.
What type of battery does the UT08A use?
It uses two AA batteries (1.5V each). Replace them when the battery indicator appears.
Can I measure AC current?
The UT08A measures AC voltage only, not AC current. For AC current, you'd need a clamp meter or a different model.
What is the safety category of this meter?
The meter is rated CAT II 600V, suitable for measuring household circuits and appliances.
How do I replace the battery?
Remove the screw at the back, slide off the cover, replace the two AA batteries, and reattach the cover. Ensure the meter is off.
Can I measure resistance in a live circuit?
No, always turn off power and discharge capacitors before measuring resistance. Otherwise, the meter may be damaged.
What do the symbols on the dial mean?
V= DC voltage, V~ AC voltage, A= DC current, Ω resistance, ➡+ diode test, and the sound wave symbol for continuity.
What should I do if the display shows '1'?
A '1' on the left indicates overload. Switch to a higher range. If already at the highest range, the measurement exceeds the meter's capability.
User questions about UT08A Uni-T
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Measurement in PDF format for free! Find your manual UT08A - Uni-T and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. UT08A by Uni-T.
USER MANUAL UT08A Uni-T
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Uni-T
Model : UT08A
Category : Measurement