Autopak 550 - Printer KONICA MINOLTA - Free user manual and instructions
Find the device manual for free Autopak 550 KONICA MINOLTA in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Thermal Transfer Label Printer |
| Brand | Konica Minolta |
| Model | Autopak 550 |
| Print Technology | Thermal Transfer / Direct Thermal |
| Print Resolution | 203 dpi (8 dots/mm) |
| Max Print Width | 4.25 inches (108 mm) |
| Max Print Speed | 4 inches per second (102 mm/s) |
| Media Width Range | 0.75 to 4.65 inches (19 to 118 mm) |
| Media Type | Labels, tags, receipts, continuous roll |
| Interface | Parallel (Centronics) or Serial (RS-232) |
| Dimensions (W x D x H) | 10.2 x 8.7 x 6.7 inches (259 x 221 x 170 mm) |
| Weight | 4.4 lbs (2.0 kg) |
| Power Supply | 100-240 V AC, 50/60 Hz, 1.0 A |
| Power Consumption | 45 W (max), 5 W (standby) |
| Operating Temperature | 41°F to 104°F (5°C to 40°C) |
| Humidity Range | 20% to 85% non-condensing |
| Functions | Label printing, bar code generation, batch printing |
| Maintenance | Clean printhead with isopropyl alcohol; replace thermal ribbon |
| Safety Features | Thermal overload protection, auto-shutdown |
| Spare Parts Availability | Printhead, platen roller, power supply, main board |
| Repairability | Modular design; user-replaceable printhead and roller |
Frequently Asked Questions - Autopak 550 KONICA MINOLTA
How do I load labels into the Konica Minolta Autopak 550?
Open the top cover, insert the label roll onto the spindle, feed the labels through the media guide, and close the cover. Ensure the labels are aligned correctly with the printhead.
What type of ribbon does the Autopak 550 use?
It uses a thermal transfer ribbon with wax or wax/resin formulation. The ribbon width should match the label width.
How do I clean the printhead of the Autopak 550?
Turn off the printer, open the cover, and gently wipe the printhead with a lint-free cloth or cotton swab dampened with isopropyl alcohol. Allow it to dry before use.
What are the possible causes of poor print quality?
Common causes include a dirty printhead, incorrect heat settings, worn platen roller, or incompatible ribbon/media combination. Clean the printhead and adjust darkness settings.
How do I connect the Autopak 550 to a computer?
Connect using a parallel (Centronics) or serial (RS-232) cable. Install the appropriate driver for your operating system.
What should I do if the printer is not feeding labels?
Check if the media sensor is aligned, ensure the label roll is not jammed, and verify that the platen roller is clean and turning freely.
How do I perform a manufacturer reset on the Autopak 550?
Turn off the printer, hold down the FEED and PAUSE buttons, turn on the printer, and release the buttons when the status lights flash. This restores default settings.
Can I print without a ribbon on the Autopak 550?
Yes, if you are using direct thermal media (labels that do not require a ribbon). Ensure the printer is set to direct thermal mode via the control panel.
Where can I find spare parts for the Autopak 550?
Spare parts such as the printhead, platen roller, and power supply are available from authorized Konica Minolta dealers or online parts retailers.
What is the maximum label length the Autopak 550 can handle?
The maximum label length is determined by the software settings, but the printer can typically handle lengths up to 39 inches (1 meter) per label.
User questions about Autopak 550 KONICA MINOLTA
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Printer in PDF format for free! Find your manual Autopak 550 - KONICA MINOLTA and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. Autopak 550 by KONICA MINOLTA.