SFP-9 - Motion detector ComNet - Free user manual and instructions
Find the device manual for free SFP-9 ComNet in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Motion Detector |
| Brand | ComNet |
| Model | SFP-9 |
| Detection Method | Passive Infrared (PIR) |
| Detection Range | Up to 12 meters (40 feet) |
| Detection Angle | 90 degrees |
| Power Supply | 12V DC, 50mA |
| Operating Temperature | -10°C to 50°C (14°F to 122°F) |
| IP Rating | IP54 (dust and splash resistant) |
| Mounting Type | Wall or ceiling mount |
| Dimensions (L x W x H) | 120 x 80 x 50 mm (4.7 x 3.1 x 2.0 in) |
| Weight | 100 g (3.5 oz) |
| Output Signal | Normally closed (NC) relay, 24V AC/DC 1A max |
| Adjustable Sensitivity | Yes, via potentiometer |
| Delay Timer | Adjustable from 10 seconds to 10 minutes |
| Light Sensor | Built-in LDR for day/night operation |
| Maintenance & Cleaning | Wipe with a soft, dry cloth. Do not use solvents or water spray. |
| Safety | Low voltage operation (12V DC); compliant with EN 50131-2-2 grade 2 |
| Spare Parts & Repairability | No user-serviceable parts. Contact ComNet or authorized dealer for replacements. |
| General Information | Designed for indoor use. Wall mounting bracket included. LED indicator for alarm. |
Frequently Asked Questions - SFP-9 ComNet
How do I install the SFP-9 motion detector?
Mount the detector on a wall or ceiling at a height of 2-2.5 meters. Connect the 12V DC power supply and the relay output (NC) to your alarm panel. Adjust the detection angle and sensitivity as needed.
What is the detection range of the SFP-9?
The SFP-9 can detect motion up to 12 meters (40 feet) with a 90-degree field of view. Actual range may vary based on environmental conditions.
Can the sensitivity be adjusted?
Yes, the SFP-9 has an adjustable sensitivity potentiometer. Turn it clockwise to increase sensitivity and counterclockwise to decrease.
How do I avoid false alarms?
To minimize false alarms, point the detector away from heat sources, direct sunlight, and moving objects like curtains or pets. Adjust sensitivity and install at recommended height.
What is the power requirement?
The SFP-9 requires a 12V DC power supply with at least 50mA current. Use a regulated power adapter or connect to an alarm panel's aux output.
Does it work outdoors?
The SFP-9 is rated IP54, meaning it is dust and splash resistant. It can be used in sheltered outdoor areas but is best suited for indoor installations.
How do I clean the motion detector?
Clean the lens and housing with a soft, dry cloth. Do not use water, solvents, or abrasive cleaners. Ensure power is disconnected before cleaning.
Can I use the SFP-9 with a smart home system?
Yes, the relay output (NC) can be integrated with most alarm panels and smart home controllers that accept a dry contact input. Check your system compatibility.
What does the LED indicator mean?
The LED lights up briefly when motion is detected during normal operation. If it stays on or blinks continuously, refer to the manual for troubleshooting.
Is the SFP-9 compliant with security standards?
Yes, the SFP-9 is designed to meet EN 50131-2-2 grade 2 requirements for intruder alarm systems. It is suitable for residential and light commercial use.
User questions about SFP-9 ComNet
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Motion detector in PDF format for free! Find your manual SFP-9 - ComNet and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. SFP-9 by ComNet.
USER MANUAL SFP-9 ComNet
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : ComNet
Model : SFP-9
Category : Motion detector