SPP3060F - Uncategorized PHILIPS - Free user manual and instructions
Find the device manual for free SPP3060F PHILIPS in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Portable Bluetooth Speaker |
| Model | SPP3060F |
| Brand | Philips |
| Dimensions (W x H x D) | 200 x 70 x 70 mm |
| Weight | 0.5 kg |
| Power Supply | Built-in rechargeable battery via USB-C |
| Battery Capacity | 2000 mAh |
| Playback Time | Up to 10 hours |
| Bluetooth Version | 5.0 |
| Output Power | 10 W |
| Frequency Response | 100 Hz – 20 kHz |
| Water Resistance | IPX5 |
| Controls | Power, Volume, Play/Pause, Next/Previous track, Bluetooth pairing |
| Charging Time | 3 hours |
| Microphone | Built-in for hands-free calls |
| Audio Input | Bluetooth, AUX (3.5 mm) |
| Maintenance | Clean with a soft dry cloth; avoid water and solvents |
| Safety Precautions | Do not disassemble; avoid extreme temperatures; use only approved charger |
| Spare Parts & Repairability | Not user-serviceable; contact Philips support for repairs |
| Package Contents | Speaker, USB-C cable, AUX cable, Quick Start Guide |
Frequently Asked Questions - SPP3060F PHILIPS
How do I pair my Philips SPP3060F with my phone?
Turn on the speaker by pressing the power button. The Bluetooth indicator will flash. On your phone, enable Bluetooth and select Philips SPP3060F from the available devices. Once paired, the indicator will stay lit.
What is the battery life of the SPP3060F?
The built-in 2000 mAh battery provides up to 10 hours of playback time at moderate volume levels. Actual battery life may vary depending on volume and usage.
Is the speaker waterproof?
The SPP3060F has an IPX5 rating, which means it is water-resistant against splashes and rain. It should not be submerged in water.
How do I charge the speaker?
Use the included USB-C cable to connect the speaker to a USB power source (e.g., a wall charger or computer). The charging LED indicates the status. A full charge takes about 3 hours.
Can I use the speaker while it is charging?
Yes, you can use the Philips SPP3060F while it is charging. However, this may extend the total charging time.
How do I reset the speaker?
If the speaker is unresponsive, press and hold the power button for about 10 seconds until the device restarts. This will clear any temporary issues.
Does the speaker have a microphone for calls?
Yes, the SPP3060F has a built-in microphone. You can answer calls hands-free by pressing the Play/Pause button when a call is incoming.
What audio sources can I connect?
You can connect via Bluetooth or use the AUX input (3.5 mm) for non-Bluetooth devices. An AUX cable is included.
How do I clean the speaker?
Use a soft, dry cloth to wipe the exterior. Do not use any liquids or harsh chemicals, as they may damage the water-resistant coating.
What should I do if the speaker does not turn on?
First, ensure the speaker is charged. Connect it to a power source and wait a few minutes. If it still does not turn on, try a reset (press and hold power button for 10 seconds). If the issue persists, contact Philips support.
User questions about SPP3060F PHILIPS
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Uncategorized in PDF format for free! Find your manual SPP3060F - PHILIPS and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. SPP3060F by PHILIPS.
USER MANUAL SPP3060F PHILIPS
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : PHILIPS
Model : SPP3060F
Category : Uncategorized