600m - Bike computer Contec - Free user manual and instructions
Find the device manual for free 600m Contec in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Bike Computer |
| Brand | Contec |
| Model | 600m |
| Dimensions | Approx. 50 x 40 x 15 mm |
| Weight | Approx. 30 g |
| Power Source | 1 CR2032 battery (included) |
| Battery Life | Approx. 1 year under normal use |
| Display Type | LCD |
| Functions | Current speed, average speed, maximum speed, trip distance, total distance, elapsed time, clock |
| Speed Units | km/h or mph (selectable) |
| Distance Units | km or mi (selectable) |
| Wheel Circumference Setting | Manual input in mm or inches |
| Auto Start/Stop | Yes |
| Water Resistance | IPX4 (splash proof) |
| Mounting Type | Handlebar bracket with zip ties or rubber strap |
| Sensor Type | Wired or wireless (model dependent: wired for 600m) |
| Maintenance | Clean with a soft dry cloth; avoid solvents |
| Battery Replacement | CR2032, open back cover with a coin |
| Spare Parts Available | Mounting bracket, sensor, magnet, battery |
| Manual Languages | English (PDF download available) |
Frequently Asked Questions - 600m Contec
How do I install the Contec 600m bike computer?
Attach the mounting bracket to your handlebar using the supplied zip ties or rubber strap. Then mount the sensor to the fork and the magnet to a spoke. Align the sensor and magnet with a 2-3 mm gap. Finally, slide the computer onto the bracket.
How do I set the wheel circumference?
Measure your wheel diameter in mm or inches. Refer to the manual for common sizes (e.g., 700c = 2096 mm). Press and hold the SET button until the circumference value flashes, then adjust using the +/- buttons.
Why is my bike computer not showing speed?
Check that the sensor and magnet are aligned and within 3 mm of each other. Ensure the magnet is securely attached to the spoke. Also verify the wheel circumference is set correctly.
How do I replace the battery?
Turn the computer over and use a coin to gently twist and open the battery cover. Remove the old CR2032 battery and insert a new one with the positive side up. Close the cover securely.
Is the Contec 600m water resistant?
Yes, it has an IPX4 rating, meaning it is splash-proof. However, avoid submerging it in water or prolonged exposure to heavy rain.
How do I reset the trip distance?
Press and hold the MODE button for about 3 seconds. The trip distance (TRIP) will reset to zero. The total odometer (ODO) cannot be reset.
Can I switch between km/h and mph?
Yes. In setup mode, navigate to the unit setting (usually by holding SET). Press MODE to toggle between km/h and mph, then press SET to confirm.
What does 'Bat' on the display mean?
The 'Bat' indicator means the battery is low and needs replacement soon. Replace the CR2032 battery as described above.
How do I clean the Contec 600m?
Use a soft, dry cloth to wipe the device. Do not use any harsh chemicals, solvents, or abrasive materials, as they may damage the display or housing.
Where can I download the user manual?
Visit the official Contec support website or the product page on notice-facile.com. You can download the PDF manual for the 600m model in English.
User questions about 600m Contec
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Bike computer in PDF format for free! Find your manual 600m - Contec and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. 600m by Contec.
USER MANUAL 600m Contec
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Contec
Model : 600m
Category : Bike computer