UM-W7 - Access Control System Interlogix - Free user manual and instructions
Find the device manual for free UM-W7 Interlogix in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Access Control System |
| Brand | Interlogix |
| Model | UM-W7 |
| Communication | Wireless (Z-Wave or proprietary) |
| Power Supply | 4 x AA batteries (not included) |
| Battery Life | Approximately 12 months under normal use |
| Dimensions (H x W x D) | 120 x 75 x 25 mm (4.7 x 3.0 x 1.0 in) |
| Weight | 150 g (5.3 oz) without batteries |
| Operating Temperature | -10°C to 50°C (14°F to 122°F) |
| Water Resistance | IP54 (splash-proof) |
| Keypad Type | Backlit numeric keypad (12 keys) |
| User Capacity | Up to 100 users |
| Languages Supported | English, French, Spanish, German |
| Mounting | Wall mount with screws (included) |
| Main Functions | Keyless entry, access codes, temporary codes, alarm integration |
| Security | Tamper alarm, anti-tamper switch |
| Maintenance | Clean with a soft, dry cloth; avoid solvents |
| Spare Parts | Batteries, mounting screws, faceplate |
| Repairability | Battery replacement only; contact support for other repairs |
| Certifications | FCC, CE, RoHS |
Frequently Asked Questions - UM-W7 Interlogix
How do I install the UM-W7 access control system?
Mount the unit on a wall using the included screws at a height of about 1.5 m. Insert 4 AA batteries (not included). Follow the programming guide to set up master code and user codes.
What do I do if the keypad is unresponsive?
Check battery voltage. Low batteries often cause unresponsiveness. Replace with fresh alkaline batteries. If issue persists, remove and reinsert batteries.
How many user codes can I program?
The UM-W7 supports up to 100 user codes. Each code can be 4-6 digits long.
Can I use the UM-W7 with my existing alarm system?
Yes, the UM-W7 can be integrated with compatible alarm panels via dry contact outputs. Consult your alarm system manual for wiring details.
How do I reset the device to factory defaults?
Remove batteries, wait 10 seconds, then hold the '#' key while reinserting batteries. Keep holding for 5 seconds until the LED flashes rapidly. All codes will be erased.
What is the battery life and how do I know when to replace them?
Battery life is approximately 12 months. The keypad will beep and display a low battery icon when replacement is needed.
Is the UM-W7 weatherproof?
The unit has an IP54 rating, meaning it is splash-proof but not waterproof. Install under a cover if exposed to rain.
Can I program temporary codes for guests?
Yes, you can set temporary codes that expire after a set number of uses or hours. Refer to the programming section of the manual.
What should I do if the keypad gets wet?
Dry immediately with a soft cloth. Do not use heat. Allow to dry completely before use. If water enters inside, remove batteries and dry thoroughly.
How do I add or delete a user code?
Enter programming mode using the master code, then follow steps: press [*] [add] [user number] [new code] [#] to add, or [*] [delete] [user number] [#] to delete.
User questions about UM-W7 Interlogix
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Access Control System in PDF format for free! Find your manual UM-W7 - Interlogix and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. UM-W7 by Interlogix.
USER MANUAL UM-W7 Interlogix
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Interlogix
Model : UM-W7
Category : Access Control System