DKW-3 HT - Microphone Nady - Free user manual and instructions
Find the device manual for free DKW-3 HT Nady in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Wireless Handheld Microphone System |
| Model | DKW-3 HT |
| Brand | Nady |
| Frequency Range | VHF 170-216 MHz |
| Modulation | FM |
| Battery Type | 9V alkaline battery |
| Battery Life | Approx. 8 hours |
| Dimensions (Transmitter) | 1.5 x 1.5 x 10 inches |
| Weight (Transmitter with battery) | 10 oz |
| Audio Output Level | 10 dBV max |
| Microphone Element | Dynamic cardioid |
| Operating Range | Up to 300 ft (90 m) line of sight |
| Frequency Response | 40 Hz – 18 kHz |
| Controls | On/Off switch, mute switch |
| Indicators | Power LED, low battery LED |
| Body Material | Metal alloy with rubber grip |
| Antenna | Built-in internal antenna |
| Included Accessories | Microphone clip, battery, user manual |
| Cleaning | Wipe with a soft dry cloth; do not use solvents |
| Safety Warnings | Do not disassemble. Keep away from moisture. |
| Spare Parts Availability | Contact Nady customer support for replacement batteries and clips |
| Repairability | Serviceable by authorized technicians only |
Frequently Asked Questions - DKW-3 HT Nady
How do I turn on the Nady DKW-3 HT microphone?
Slide the On/Off switch located on the side of the microphone handle to the 'On' position. The power LED will light up green.
What type of battery does the DKW-3 HT use and how long does it last?
It uses a standard 9V alkaline battery. Under normal use, the battery lasts approximately 8 hours. Replace when the low battery LED flashes red.
How do I pair the microphone with a receiver?
Ensure both the transmitter and receiver are set to the same VHF frequency. Turn on the receiver first, then the transmitter. The RF indicator on the receiver should light up.
What is the operating range of the DKW-3 HT?
The microphone has an effective range of up to 300 feet (90 meters) in open line of sight. Walls and obstacles may reduce range.
Why is there no sound from the microphone?
Check that the mute switch is not engaged, the battery is fresh, and the receiver is on the correct frequency. Also verify that the receiver volume is not turned down.
Can I use the DKW-3 HT with multiple receivers?
No, each transmitter is designed to be used with a single corresponding receiver at a time. Using multiple receivers may cause interference.
How do I clean the microphone?
Wipe the exterior with a soft, dry cloth. Do not use any liquids, solvents, or abrasive cleaners. For the grille, gently brush away debris.
What should I do if the range is poor?
Ensure the antenna on the receiver is fully extended. Avoid placing the receiver behind metal objects or in enclosed racks. Check for RF interference from other devices.
Is the DKW-3 HT compatible with other Nady receivers?
It is compatible with Nady receivers operating on the same VHF frequency band. Check the frequency range on both units to confirm compatibility.
How do I replace the battery?
Unscrew the battery compartment cap at the bottom of the handle. Remove the old battery and insert a new 9V battery, observing polarity. Screw the cap back on securely.
User questions about DKW-3 HT Nady
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Microphone in PDF format for free! Find your manual DKW-3 HT - Nady and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. DKW-3 HT by Nady.
USER MANUAL DKW-3 HT Nady
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Nady
Model : DKW-3 HT
Category : Microphone