P2DO1212 - Uncategorized Hoffman - Free user manual and instructions
Find the device manual for free P2DO1212 Hoffman in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Wall-Mounted Electrical Enclosure |
| Model | P2DO1212 |
| Brand | Hoffman |
| Dimensions (H x W x D) | 12 in x 12 in x 8 in (30.5 cm x 30.5 cm x 20.3 cm) |
| Weight | Approximately 15 lbs (6.8 kg) |
| Material | 16-gauge steel |
| Finish | Gray powder coat (ANSI 61) |
| IP Rating | IP66 (dust-tight and protected against powerful water jets) |
| NEMA Rating | Type 4/12 (indoor and outdoor use, dust-tight, rainproof) |
| Mounting | Wall-mountable with included bracket |
| Door Type | Hinged door with quarter-turn latch |
| Gasket | Foam-in-place gasket for weatherproof seal |
| Internal Panel | Removable galvanized steel mounting panel |
| Grounding | External ground stud and internal bonding provision |
| Operating Temperature | -40°F to 140°F (-40°C to 60°C) |
| Standards Compliance | UL 50, CSA C22.2, NEMA 250 |
| Key Features | Single door, continuous hinge, removable door, quarter-turn latch |
| Accessories Included | Mounting bracket, panel screws, key |
| Maintenance | Wipe with damp cloth; avoid solvents. Replace gasket if damaged. |
| Repairability | Replacement parts (door, gasket, latch) available from Hoffman. |
Frequently Asked Questions - P2DO1212 Hoffman
What is the Hoffman P2DO1212 used for?
The Hoffman P2DO1212 is a wall-mounted electrical enclosure designed to house and protect electrical components, terminals, and wiring in industrial, commercial, or outdoor environments. It provides a weatherproof and dust-tight housing.
What are the dimensions of the P2DO1212?
The enclosure measures 12 inches (30.5 cm) high, 12 inches (30.5 cm) wide, and 8 inches (20.3 cm) deep.
Is the P2DO1212 suitable for outdoor use?
Yes, it has an IP66 and NEMA Type 4/12 rating, making it suitable for outdoor use, protecting against rain, snow, and dust.
Can I add a lock to the enclosure?
Yes, the quarter-turn latch can be replaced with a padlock hasp (sold separately) to secure the enclosure with a padlock.
How do I install the enclosure?
Use the included wall-mounting bracket to attach the enclosure to a sturdy wall. Ensure the surface is flat and capable of supporting the weight. Refer to the manual for detailed installation instructions.
What material is the enclosure made of?
The enclosure is constructed from 16-gauge steel with a gray powder coat finish (ANSI 61) for corrosion resistance.
Can I mount electrical panels inside?
Yes, the enclosure includes a removable galvanized steel mounting panel for attaching DIN rails, terminal blocks, or other components.
How do I clean the enclosure?
Clean the exterior with a damp cloth and mild detergent. Avoid abrasive cleaners or solvents. Inspect the gasket regularly and replace if damaged.
Does the enclosure have a grounding provision?
Yes, it features an external ground stud and internal bonding point for proper grounding per electrical codes.
Where can I purchase replacement parts?
Replacement parts such as doors, gaskets, and latches are available from Hoffman distributors or the Hoffman website.
User questions about P2DO1212 Hoffman
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Uncategorized in PDF format for free! Find your manual P2DO1212 - Hoffman and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. P2DO1212 by Hoffman.
USER MANUAL P2DO1212 Hoffman
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Hoffman
Model : P2DO1212
Category : Uncategorized