KATFWASH10A - Washing machine Kogan - Free user manual and instructions
Find the device manual for free KATFWASH10A Kogan in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Front-Loading Washing Machine |
| Brand | Kogan |
| Model | KATFWASH10A |
| Capacity | 10 kg |
| Dimensions (H x W x D) | 850 mm x 600 mm x 600 mm |
| Net Weight | 70 kg |
| Power Supply | 220-240 V ~ 50 Hz, 10 A |
| Power Consumption | 2000 W (heating), 500 W (motor) |
| Water Connection | Cold water only |
| Spin Speed | Up to 1400 rpm |
| Number of Programs | 15 (including Cotton, Synthetic, Delicate, Quick, Wool, etc.) |
| Temperature Settings | Cold, 20°C, 30°C, 40°C, 60°C, 90°C |
| Additional Features | Child Lock, Delay Start (1-24h), End of Cycle Signal, Self-Cleaning |
| Energy Efficiency Class | A+++ |
| Noise Level (Wash/Spin) | 54 dB / 76 dB |
| Door Type | Porthole with glass window, 180° opening |
| Drum Material | Stainless steel |
| Control Type | Electronic with LED display |
| Interior Light | Yes |
| Cleaning & Maintenance | Clean filter after every cycle; descale monthly; wipe door seal |
| Safety Features | Anti-flood system, unbalanced load detection, overheat protection |
| Warranty | 2 years (parts and labor) |
Frequently Asked Questions - KATFWASH10A Kogan
How do I start a wash cycle on the Kogan KATFWASH10A?
Load the drum, add detergent, close the door. Select a program via the knob, adjust settings if needed, then press the Start/Pause button.
What should I do if the machine displays an error code?
Refer to the manual for error code meanings. Common codes: E1 (water supply issue), E2 (drain problem). Try power cycling or cleaning filters.
How can I clean the detergent drawer?
Press the release button inside the drawer and pull it out. Wash with warm water, use a brush for residue, and dry before reinserting.
Can I use a separate dryer on top of this washing machine?
No. The KATFWASH10A is not stackable. Place a dryer beside it or on a separate stand.
Why is my cycle taking longer than expected?
The machine may be adjusting time based on load weight, unbalanced loads, or water heating. Also Delay Start may be active. Check settings.
How do I enable the child lock?
Press and hold the Child Lock button (or a combination) for 3 seconds until the icon appears. To disable, repeat the action.
What is the maximum spin speed?
The maximum spin speed is 1400 rpm. You can adjust it per program if lower speed is desired.
How often should I clean the pump filter?
Clean the filter every 10-15 cycles or if you notice drainage issues. Turn off the machine, unplug, and remove the filter cover.
The door won't open after a cycle. What should I do?
Wait 2-3 minutes after the cycle ends. If still locked, check if there is water inside (drain manually via emergency hose). Some models have a door lock delay.
Can I use liquid detergent?
Yes. Pour liquid detergent into the appropriate compartment (marked with II or liquid symbol). Avoid overfilling past the max line.
User questions about KATFWASH10A Kogan
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Washing machine in PDF format for free! Find your manual KATFWASH10A - Kogan and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. KATFWASH10A by Kogan.