VLHDMIEXTHDB2.0 - AV Extender Vivolink - Free user manual and instructions
Find the device manual for free VLHDMIEXTHDB2.0 Vivolink in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | AV Extender (HDMI over HDBaseT) |
| Brand | Vivolink |
| Model | VLHDMIEXTHDB2.0 |
| Maximum Transmission Distance | Up to 100 meters (328 feet) via Cat5e/6 cable |
| Video Resolution Support | Up to 4K@60Hz (4:4:4) or 1080p@120Hz |
| HDMI Standard | HDMI 2.0 with HDCP 2.2 |
| Audio Support | Multi-channel audio including Dolby TrueHD and DTS-HD Master Audio |
| Ethernet Pass-through | Yes, 100Mbps |
| IR Control | Bi-directional IR pass-through (20-60kHz) |
| Power Supply | External power adapter: 5V DC, 2A (included) |
| Dimensions (Transmitter) | 2.8 x 2.4 x 0.9 inches (70 x 60 x 22 mm) |
| Dimensions (Receiver) | 2.8 x 2.4 x 0.9 inches (70 x 60 x 22 mm) |
| Weight (each unit) | Approximately 0.2 lbs (90 g) |
| Operating Temperature | 32°F to 104°F (0°C to 40°C) |
| Storage Temperature | -4°F to 140°F (-20°C to 60°C) |
| Relative Humidity | 10% to 90% (non-condensing) |
| Input Connectors (Transmitter) | 1x HDMI Type A, 1x RJ45 (Cat5e/6), 1x IR blaster, 1x Power |
| Output Connectors (Receiver) | 1x HDMI Type A, 1x RJ45 (Cat5e/6), 1x IR receiver, 1x Power |
| Maintenance | Clean with a soft, dry cloth. Do not use liquids or aerosols. |
| Safety | Keep away from moisture and extreme temperatures. |
| Spare Parts and Repairability | No user-serviceable parts. Contact vendor for replacement. |
Frequently Asked Questions - VLHDMIEXTHDB2.0 Vivolink
What is the maximum distance supported by the VLHDMIEXTHDB2.0?
The extender can transmit HDMI signals up to 100 meters (328 feet) over a single Cat5e/6 cable.
Does it support 4K resolution?
Yes, it supports up to 4K@60Hz (4:4:4) and 1080p@120Hz.
Is HDCP 2.2 supported?
Yes, it is compliant with HDCP 2.2 and older versions.
Can I use any Ethernet cable?
For best performance, use Cat5e or Cat6 cables. Shielded cables may be required in areas with high interference.
How do I connect the IR extender?
Connect the IR blaster to the IR OUT port on the transmitter and the IR receiver to the IR IN port on the receiver. Point the remote at the receiver.
Does the extender require power?
Yes, both the transmitter and receiver need to be powered via the included 5V DC adapters.
Can I extend Ethernet over the same cable?
Yes, the extender supports 100Mbps Ethernet pass-through using the RJ45 ports.
What should I do if there is no picture?
Check all cable connections, ensure both units are powered, and verify that the HDMI source and display are set to the correct input. Try a shorter cable to rule out cable issues.
Is the device plug-and-play?
Yes, it is plug-and-play. No software installation required. Just connect and power on.
Can I daisy-chain multiple extenders?
No, this extender is designed for point-to-point connections. For longer distances, use a switcher or repeater.
User questions about VLHDMIEXTHDB2.0 Vivolink
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your AV Extender in PDF format for free! Find your manual VLHDMIEXTHDB2.0 - Vivolink and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. VLHDMIEXTHDB2.0 by Vivolink.
USER MANUAL VLHDMIEXTHDB2.0 Vivolink
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Vivolink
Model : VLHDMIEXTHDB2.0
Category : AV Extender