GSR-VW02 - Uncategorized VAIS Technology - Free user manual and instructions
Find the device manual for free GSR-VW02 VAIS Technology in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Vehicle Interface Module |
| Model | GSR-VW02 |
| Compatible Vehicles | Volkswagen models with MIB or RCD/RNS systems (2008-2018) |
| Dimensions (W x D x H) | 3.5 x 2.0 x 1.0 in (89 x 51 x 25 mm) |
| Weight | 2.5 oz (70 g) |
| Input Power | 12V DC, 1A max (from vehicle) |
| Power Consumption | 0.5W standby, 2W active |
| Primary Function | Enables aftermarket camera input to factory screen |
| Video Input | 1x composite (RCA) or CVBS, 0.5-2Vpp |
| Video Output | Factory LVDS display (emulates OEM camera signal) |
| Trigger Input | Reverse gear signal (12V) |
| Installation Type | Plug-and-play between head unit and display |
| Connectors | ISO/Quadlock, LVDS Fakra (specific to VW) |
| Operating Temperature | -4°F to 158°F (-20°C to 70°C) |
| Storage Temperature | -40°F to 185°F (-40°C to 85°C) |
| Additional Features | On-screen display (OSD) menu for settings, automatic switching |
| Compliance | CE, FCC, RoHS |
| Warranty | 1 year limited |
| Maintenance | Clean with dry cloth; no liquids. Keep connectors free of dust. |
| Safety | Install away from airbags. Disconnect battery before installation. |
| Repairability | No user-serviceable parts. Contact VAIS for support. |
Frequently Asked Questions - GSR-VW02 VAIS Technology
Does the GSR-VW02 support all Volkswagen models?
It is designed for most VW models with MIB or RCD/RNS systems from 2008-2018, but compatibility may vary. Check the VAIS website or contact support for your specific model.
How do I install the GSR-VW02?
Installation is plug-and-play: disconnect the factory display’s LVDS cable, connect the GSR-VW02 between the head unit and display, then connect the reverse trigger wire to the vehicle’s reverse light circuit. Ensure battery is disconnected during installation.
Can I connect multiple cameras?
The module supports one composite video input. For multiple cameras, you would need an external video switcher.
Will the aftermarket camera work with my factory screen?
Yes, it converts the composite video signal to the factory LVDS format, making the camera display on the original screen when reverse is engaged.
Do I need any additional software or coding?
No software or coding is required. The module emulates an OEM camera, so the head unit automatically switches to the camera view when the reverse trigger is activated.
What if the camera does not appear on the screen?
First, verify the reverse trigger wire is connected to a 12V signal when in reverse. Also check camera power and video connection. Use the OSD menu to adjust input settings if needed.
How do I access the OSD menu?
Hold the button on the module (if equipped) or use a specific key sequence on the factory head unit (e.g., press and hold the RADIO and MEDIA buttons for 5 seconds). Refer to the user manual for exact steps.
Can I keep the original backup camera if my car has one?
The GSR-VW02 replaces the factory camera function. If your car already has a camera, you would bypass it with this module. It is intended for vehicles without factory cameras.
What is the maximum video cable length?
The composite video cable from the camera to the module should not exceed 10 meters (33 feet) to avoid signal degradation.
Where can I find the user manual?
The manual is available for free download on the Notice-Facile website for the GSR-VW02 model. You can also visit the VAIS Technology support page.
User questions about GSR-VW02 VAIS Technology
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Uncategorized in PDF format for free! Find your manual GSR-VW02 - VAIS Technology and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. GSR-VW02 by VAIS Technology.