ExtremeAir EXT7 - Hand dryer American Dryer - Free user manual and instructions
Find the device manual for free ExtremeAir EXT7 American Dryer in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Hand Dryer |
| Brand | American Dryer |
| Model | ExtremeAir EXT7 |
| Dimensions (L x W x H) | 11.5 x 8.5 x 7.5 inches (29.2 x 21.6 x 19.1 cm) |
| Weight | 8.5 lbs (3.9 kg) |
| Power Supply | 120V AC, 60 Hz, 15A |
| Power Consumption | 1800 W |
| Airflow Speed | Up to 19,000 ft/min (96 m/s) |
| Drying Time | Approximately 10-12 seconds |
| Noise Level | 70 dB (A) |
| Activation Method | Automatic infrared sensor |
| Heating Type | Optional heated air (user selectable) |
| Filter Type | Washable foam pre-filter |
| Construction Material | High-impact ABS plastic and stainless steel |
| Mounting Type | Wall-mounted (hardwired) |
| Safety Features | Overheat protection, automatic shut-off, tamper-resistant screws |
| Maintenance | Clean exterior with damp cloth; wash filter monthly |
| Spare Parts Available | Motor, sensor, heating element, filter, nozzle |
| Repairability | Modular design; user-serviceable parts with instructions |
| Warranty | 3-year limited warranty |
| Compliance | UL listed, ADA compliant |
Frequently Asked Questions - ExtremeAir EXT7 American Dryer
How do I install the ExtremeAir EXT7 hand dryer?
Installation requires hardwiring to a 120V circuit. Mount the unit using the provided template and screws. Ensure proper clearance from walls. For detailed steps, refer to the installation manual.
How often should I clean the filter?
Clean the washable foam filter at least once a month. Remove the filter cover, take out the foam, and wash with mild soap and water. Let it dry completely before reinserting.
Why is my hand dryer not turning on?
Check the power supply: ensure the circuit breaker is not tripped and the unit is properly wired. Also verify that the safety cutoff hasn't activated due to overheating. Allow the dryer to cool and reset.
Can I adjust the heat setting?
Yes, the ExtremeAir EXT7 has a user-selectable heat option. Typically, there is a switch inside the unit to enable or disable the heating element. Refer to the manual for location.
What is the drying time compared to other dryers?
The ExtremeAir EXT7 dries hands in approximately 10-12 seconds, thanks to its high-speed airflow of 19,000 ft/min. This is faster than many standard dryers.
How do I reset the overheat protection?
If the unit overheats, it will automatically shut off. Unplug or turn off the circuit for 15-20 minutes. Once cooled, the thermostat will reset automatically. Ensure vents are not blocked.
Is the dryer ADA compliant?
Yes, the ExtremeAir EXT7 meets ADA requirements for accessibility, with a low-profile design and easy activation via infrared sensor.
What spare parts are available and where can I get them?
Spare parts include the motor, sensor module, heating element, filter, and nozzle. You can order them from the American Dryer website or authorized dealers. Use only genuine parts.
How do I clean the exterior?
Use a soft, damp cloth with mild detergent. Do not use abrasive cleaners or immerse the unit in water. Avoid spraying water directly into the vents.
What is the warranty coverage?
The ExtremeAir EXT7 comes with a 3-year limited warranty covering defects in materials and workmanship. Proof of purchase is required. Contact American Dryer support for claims.
User questions about ExtremeAir EXT7 American Dryer
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Hand dryer in PDF format for free! Find your manual ExtremeAir EXT7 - American Dryer and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. ExtremeAir EXT7 by American Dryer.