1225 - Water dispenser Bloomfield - Free user manual and instructions
Find the device manual for free 1225 Bloomfield in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Water Dispenser |
| Brand | Bloomfield |
| Model | 1225 |
| Dimensions (H x W x D) | 40 x 12 x 12 inches |
| Weight | 20 lbs |
| Power Supply | 120V, 60Hz, 150W |
| Water Capacity | 3 gallons (hot & cold tanks) |
| Hot Water Temperature | 185°F (85°C) |
| Cold Water Temperature | 40°F (4°C) |
| Dispensing Options | Hot, Cold, Room Temperature |
| Cooling System | Compressor-based |
| Heating System | Stainless steel heating tank |
| Safety Features | Child lock, auto shut-off, overheat protection |
| Maintenance | Descaling every 3 months, clean drip tray weekly |
| Replacement Parts | Drip tray, faucet, water tank, heating element |
| Warranty | 1 year limited |
| Manual Included | Yes, PDF available |
Frequently Asked Questions - 1225 Bloomfield
How do I set up the Bloomfield 1225 water dispenser?
Place the dispenser on a level surface, plug into a grounded outlet, and wait 30 minutes for the water to settle before first use. Then fill the water tank and press the power switch.
Why is my water dispenser not cooling?
Check if the power cord is properly connected and the cooling switch is on. Ensure the compressor has adequate ventilation. If issue persists, the cooling system may need service.
How often should I clean the dispenser?
Clean the exterior weekly with a damp cloth. Descale the internal system every 3 months using a vinegar solution. Replace the water tank every 6 months for optimal hygiene.
Can I use tap water in the dispenser?
Yes, but filtered water is recommended to minimize mineral buildup. If using tap water, you must descale more frequently.
Why is the water from the hot faucet not hot?
Wait at least 10 minutes after turning on the heating switch. If still cold, check the thermal fuse. The heating element may need replacement.
How do I replace the drip tray?
Slide the old drip tray out from under the faucets. Insert the new tray by aligning the grooves and pushing until it clicks into place.
What does the child lock feature do?
The child lock prevents accidental dispensing of hot water by requiring a two-step activation. Press and hold the child lock button for 3 seconds to enable or disable.
Why is there a strange odor from the water?
This can occur after long periods of non-use. Drain the tank, clean with a mild bleach solution (1 tsp per gallon), and rinse thoroughly. Run fresh water through the system before drinking.
What is the warranty period for the Bloomfield 1225?
The dispenser comes with a 1-year limited warranty covering manufacturer defects. Labor and shipping costs are not included.
How do I descale the water dispenser?
Mix equal parts white vinegar and water, fill the tank, let it sit for 30 minutes, then drain. Run 2-3 full tanks of fresh water to remove any vinegar residue.
User questions about 1225 Bloomfield
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Water dispenser in PDF format for free! Find your manual 1225 - Bloomfield and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. 1225 by Bloomfield.
USER MANUAL 1225 Bloomfield
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Bloomfield
Model : 1225
Category : Water dispenser