Weldforce 201T - Welding machine Weldclass - Free user manual and instructions
Find the device manual for free Weldforce 201T Weldclass in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | TIG/MMA Welding Machine |
| Brand | Weldclass |
| Model | Weldforce 201T |
| Dimensions (L x W x H) | 350 mm x 150 mm x 250 mm |
| Weight | 5.2 kg |
| Power Supply | 230 V, 50/60 Hz |
| Input Current | 15 A |
| Output Current Range (MMA) | 10 - 200 A |
| Output Current Range (TIG) | 10 - 200 A |
| Duty Cycle | 60% @ 200 A (10 min cycle) |
| No-Load Voltage | 56 V |
| Welding Processes | DC TIG, MMA |
| Functions | Hot Start, Arc Force, Anti-Stick |
| Cooling | Fan forced |
| Gas Connection | Included for TIG welding |
| Included Accessories | TIG torch (with gas valve), MMA holder, ground clamp, electrode |
| Safety Features | Overheating protection, IP21S |
| Maintenance | Clean dust regularly, check cable connections |
| Spare Parts / Repairability | Contact Weldclass service for replacement parts |
| General Information | Inverter technology, DC only, 64-page user manual available |
Frequently Asked Questions - Weldforce 201T Weldclass
How do I set up the Weldforce 201T for TIG welding?
Connect the TIG torch to the negative terminal and ground clamp to positive. Ensure gas supply is connected to the torch. Select TIG mode on the panel and adjust current as needed.
How do I use the MMA (stick) welding function?
Attach the electrode holder to the positive terminal and ground clamp to negative. Set the machine to MMA mode, select appropriate welding current, and strike an arc. The hot start and arc force features help maintain stable arc.
What does the duty cycle mean?
The duty cycle indicates how long you can weld continuously before the machine needs to cool down. For Weldforce 201T, it is 60% at 200A over a 10-minute period, meaning you can weld for 6 minutes and rest for 4 minutes.
How often should I clean the machine?
Clean the exterior and internal fan vents with a dry cloth or compressed air every few uses to prevent dust buildup. Avoid using solvents.
What safety precautions should I take?
Always wear welding helmet with appropriate shade, gloves, and protective clothing. Ensure good ventilation. Disconnect power before opening the machine. Do not weld near flammable materials.
What should I do if the machine doesn't start an arc?
Check that the power cord is securely connected and the main power is on. Verify all cable connections to the workpiece and electrode. Inspect the electrode for damage. Increase the current setting or activate hot start.
Can the Weldforce 201T weld aluminum?
This is a DC machine, so TIG welding of aluminum is not recommended without AC. For DC TIG, aluminum welding is difficult and may result in poor quality. It is best suited for steel and stainless steel.
What is the warranty period?
Weldclass typically offers a 2-year warranty from the date of purchase. Check your specific regional warranty terms.
How do I adjust the welding current?
Use the adjustment knob on the front panel. Turn clockwise to increase current and counterclockwise to decrease. The current range is 10-200A for both TIG and MMA.
Where can I find spare parts or service?
Contact Weldclass customer service or visit an authorized service center. Consumables like electrodes, torch parts are widely available online.
User questions about Weldforce 201T Weldclass
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Welding machine in PDF format for free! Find your manual Weldforce 201T - Weldclass and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. Weldforce 201T by Weldclass.
USER MANUAL Weldforce 201T Weldclass
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Weldclass
Model : Weldforce 201T
Category : Welding machine