Accurance R1002 - Access Control System OPTEX - Free user manual and instructions
Find the device manual for free Accurance R1002 OPTEX in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Access Control System |
| Brand | Optex |
| Model | Accurance R1002 |
| Dimensions (W x H x D) | 120 mm x 80 mm x 30 mm |
| Weight | Approx. 200 g |
| Power Supply | 12V DC, 500 mA |
| Power Consumption | Less than 3W (standby) |
| Operating Temperature | -20°C to +60°C |
| Humidity | 0% to 95% (non-condensing) |
| Supported Credentials | 125 kHz EM cards, 13.56 MHz MIFARE cards |
| User Capacity | Up to 10,000 users |
| Event Log | Up to 50,000 events |
| Communication | RS-485, Wiegand, TCP/IP (optional) |
| Relay Output | 1 Form C relay (1A @ 30V DC) |
| Inputs | Door contact, exit button, tamper |
| Main Functions | Door lock control, access scheduling, anti-passback, duress alarm |
| Clean and Care | Wipe with a soft, dry cloth; avoid solvents |
| Safety Features | Tamper detection, encrypted communication, fail-safe/fail-secure mode |
| Spare Parts & Repairability | Replaceable card reader module; service authorized dealers |
| General Information | Indoor use only; CE, FCC certified |
Frequently Asked Questions - Accurance R1002 OPTEX
How do I connect the Accurance R1002 to a door lock?
Connect the relay output (COM, NO, NC) to your electric lock. Use the fail-safe or fail-secure configuration as needed. Refer to the wiring diagram in the manual.
What types of cards are compatible?
The R1002 supports 125 kHz EM and 13.56 MHz MIFARE credentials. Ensure your cards are programmed correctly.
Can I use the system with a PC for management?
Yes, via RS-485 or an optional TCP/IP module. Use Optex software for centralized control.
How many users can be stored?
The R1002 can store up to 10,000 user credentials and 50,000 event logs.
Does the system support anti-passback?
Yes, anti-passback is supported to prevent card sharing. Configure it in the system settings.
How do I reset the device to factory defaults?
Press and hold the reset button (inside the unit) for 10 seconds. All configuration will be lost. Backup your data first.
What should I do if the reader doesn't recognize cards?
Check the wiring and card format. Ensure the card is within range (typically 5 cm). Clean the reader surface with a dry cloth.
Can I connect an exit button?
Yes, connect a normally open momentary switch to the exit button input. It will trigger the relay when pressed.
Is the system weatherproof?
No, the R1002 is designed for indoor use only. For outdoor installation, use a weatherproof enclosure.
How do I update the firmware?
Connect via TCP/IP or RS-485, use the Optex firmware update tool. Obtain the latest firmware from the Optex website.
User questions about Accurance R1002 OPTEX
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Access Control System in PDF format for free! Find your manual Accurance R1002 - OPTEX and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. Accurance R1002 by OPTEX.
USER MANUAL Accurance R1002 OPTEX
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : OPTEX
Model : Accurance R1002
Category : Access Control System