Mega Go Bar 50 RGBA - Effects machine American DJ - Free user manual and instructions
Find the device manual for free Mega Go Bar 50 RGBA American DJ in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | LED Effects Light Bar |
| Model | Mega Go Bar 50 RGBA |
| Brand | American DJ |
| LED Type | 50 x 3W RGBA (Red, Green, Blue, Amber) |
| Dimensions (L x W x H) | 39.4 x 4.2 x 5.1 inches (100 x 10.7 x 13 cm) |
| Weight | 7.7 lbs (3.5 kg) |
| Power Consumption | 60W max |
| Power Input | AC 100-240V, 50/60Hz |
| DMX Channels | 4, 6, or 10 selectable |
| DMX Connectors | 3-pin XLR in/out |
| Control Modes | DMX, Master/Slave, Sound Active, Auto Program |
| Sound Active | Built-in microphone with sensitivity adjustment |
| Beam Angle | 30 degrees |
| Housing Material | Aluminum and plastic |
| Cooling | Convection cooled (no fans) |
| Operating Position | Any safe position (mounting brackets included) |
| Included Accessories | Power cord, mounting brackets, screws, user manual |
| Maintenance | Clean with a dry cloth; avoid liquids |
| Safety Rating | CE, RoHS compliant |
Frequently Asked Questions - Mega Go Bar 50 RGBA American DJ
How do I set up the Mega Go Bar 50 RGBA for the first time?
Unpack the fixture, attach the mounting brackets securely, connect the power cord, and turn on the unit. It will default to an auto program. For DMX control, connect a DMX controller via 3-pin XLR and set the DMX address.
How many DMX channels does the Mega Go Bar 50 RGBA use?
You can select between 4, 6, or 10 DMX channels. Use the menu buttons to choose the mode that fits your controller. Refer to the manual for channel assignments.
Can I use the fixture in sound-active mode?
Yes, the fixture has a built-in microphone. Press the 'Sound' button to activate sound-active mode. Adjust the sensitivity via the menu to respond to music beats.
How do I link multiple units together?
Use DMX cables to daisy-chain fixtures. Set the first unit as 'Master' and the others as 'Slave' using the menu. They will then follow the master's program.
What is the beam angle of the LEDs?
The beam angle is 30 degrees, providing a medium spread. For wider coverage, consider placing units further away or using diffusion filters.
Can I mount this fixture upside down?
Yes, the fixture can be mounted in any orientation. Use the included omega brackets for truss mounting and ensure the safety cable is attached.
How do I clean the Mega Go Bar 50 RGBA?
Disconnect power and use a soft, dry cloth to wipe the housing. For the lenses, use a lens cleaner and a microfiber cloth. Avoid using water or harsh chemicals.
What power supply is needed?
The fixture operates on AC 100-240V, 50/60Hz. It has an internal auto-switching power supply, so you can use it worldwide with the appropriate power cord.
Why is the fixture not responding to DMX?
Check that the DMX cable is connected properly, the DMX address matches the controller, and the controller is on the correct universe. Ensure termination plug is used at the end of the chain.
Can I replace the LEDs?
The LEDs are not user-serviceable. If an LED fails, contact American DJ support for repair or replacement options. Do not attempt to open the fixture yourself.
User questions about Mega Go Bar 50 RGBA American DJ
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Effects machine in PDF format for free! Find your manual Mega Go Bar 50 RGBA - American DJ and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. Mega Go Bar 50 RGBA by American DJ.
USER MANUAL Mega Go Bar 50 RGBA American DJ
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : American DJ
Model : Mega Go Bar 50 RGBA
Category : Effects machine