ALF-MMX6464A-N - Router Alfatron - Free user manual and instructions
Find the device manual for free ALF-MMX6464A-N Alfatron in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Router |
| Brand | Alfatron |
| Model | ALF-MMX6464A-N |
| Form Factor | 19-inch rackmount |
| Dimensions (W x D x H) | 482 x 300 x 44 mm |
| Weight | 5.0 kg |
| Power Supply | AC 100-240V, 50/60Hz, 100W |
| Ethernet Ports | 48 x 10/100/1000 Mbps, 4 x SFP+ |
| Switching Capacity | 176 Gbps |
| VLAN Support | 802.1Q VLAN, up to 4096 VLANs |
| QoS | 802.1p, DiffServ |
| Management | Web GUI, CLI, SNMP |
| Security | 802.1X, ACLs, MAC filtering |
| Cooling | 2 x built-in fans |
| Operating Temperature | 0°C to 40°C |
| Humidity | 10% to 90% non-condensing |
| Maintenance | Clean with a dry, lint-free cloth |
| Safety Warnings | Avoid water exposure; do not block vents |
| Spare Parts Availability | Contact Alfatron support |
| Repairability | Serviceable by qualified technician only |
Frequently Asked Questions - ALF-MMX6464A-N Alfatron
How do I reset the Alfatron ALF-MMX6464A-N to factory defaults?
Press and hold the reset button on the front panel for 10 seconds using a paperclip. The device will reboot with factory settings.
What is the default IP address to access the web interface?
The default IP address is 192.168.1.1. Ensure your computer is in the same subnet (e.g., 192.168.1.x) to access the management interface.
Does this router support PoE?
No, the ALF-MMX6464A-N does not support Power over Ethernet. Each device connected must have its own power source.
Can I stack multiple units?
This model does not support stacking. It operates as a standalone layer 2+ switch/router.
How do I update the firmware?
Download the latest firmware from the Alfatron website. Then, log into the web GUI, go to System > Firmware Upgrade, and upload the file.
What is the maximum VLAN count?
The device supports up to 4096 VLANs based on IEEE 802.1Q standard.
Does it support link aggregation?
Yes, the ALF-MMX6464A-N supports LACP (802.3ad) link aggregation for increased bandwidth and redundancy.
Is the device rack-mountable?
Yes, it comes with rack-mount brackets and is designed for a standard 19-inch rack.
What is the power consumption?
The typical power consumption is 100W under full load. It operates on AC 100-240V.
How do I configure a static route?
In the web GUI, navigate to Routing > Static Routes. Enter the destination network, subnet mask, and next hop IP, then apply.
User questions about ALF-MMX6464A-N Alfatron
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Router in PDF format for free! Find your manual ALF-MMX6464A-N - Alfatron and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. ALF-MMX6464A-N by Alfatron.
USER MANUAL ALF-MMX6464A-N Alfatron
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Alfatron
Model : ALF-MMX6464A-N
Category : Router