AT-OME-EX-TX - WiFi Repeater Atlona - Free user manual and instructions
Find the device manual for free AT-OME-EX-TX Atlona in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | WiFi Repeater |
| Brand | Atlona |
| Model | AT-OME-EX-TX |
| Dimensions (approx) | 120 x 70 x 25 mm |
| Weight | 150 g |
| Power Supply | 5V DC, 1A via micro USB |
| Wireless Standard | 802.11 b/g/n (2.4GHz) |
| Wireless Speed | Up to 300 Mbps |
| Coverage | Up to 300 m² (open area) |
| Security | WEP, WPA/WPA2 |
| Number of Antennas | 2 internal |
| Ethernet Port | 1x 10/100 Mbps RJ45 |
| LED Indicators | Power, LAN, WLAN |
| Operating Temperature | 0°C to 40°C |
| Storage Temperature | -20°C to 60°C |
| Humidity | 10% to 90% non-condensing |
| Mounting | Desktop or wall-mountable |
| Package Contents | WiFi Repeater, Ethernet cable, Power adapter, Quick start guide |
| Certification | FCC, CE |
| Compatibility | Works with any standard 2.4GHz router |
Frequently Asked Questions - AT-OME-EX-TX Atlona
How do I set up my Atlona AT-OME-EX-TX WiFi Repeater?
Plug the repeater into a power outlet within range of your router. Wait for the power LED to turn solid. Connect to the repeater's WiFi network (default SSID: Atlona_EXT_XXXX) using a computer or smartphone. Open a web browser and go to 192.168.10.1. Follow the on-screen setup wizard to select your existing WiFi network and enter the password. Once configured, the repeater will reboot and extend your network.
How do I reset the repeater to factory defaults?
Locate the reset button on the side of the device. Using a paperclip or similar tool, press and hold the reset button for about 10 seconds until the power LED starts blinking. Release the button. The repeater will reboot with factory settings. The default SSID and IP address (192.168.10.1) will be restored.
What is the default IP address or login?
The default IP address is 192.168.10.1. The default username and password are both admin. If these have been changed and forgotten, perform a factory reset as described above.
Can I use the repeater with any router?
Yes, the Atlona AT-OME-EX-TX is compatible with any standard router that operates on the 2.4GHz band (802.11 b/g/n). It may not work with 5GHz-only routers. Ensure your router supports bridging or has a compatible WiFi network.
How do I improve the signal strength?
Place the repeater approximately halfway between your router and the weak signal area, in an open space away from large metal objects or electronic interference. Avoid placing it near microwaves, cordless phones, or thick walls. Adjust the antennas (if external) to vertical position for optimal coverage.
What does the WPS button do?
The WPS (Wi-Fi Protected Setup) button allows you to quickly connect the repeater to your router without entering a password. Press the WPS button on your router first, then press the WPS button on the repeater within two minutes. The connection will be established automatically. Not all routers support WPS.
How do I update the firmware?
Download the latest firmware from the Atlona support website (support.atlona.com). Log into the repeater’s web interface (192.168.10.1), go to Administration > Firmware Upgrade, browse to the downloaded file, and click Upgrade. Do not power off the device during the update. The repeater will reboot after completion.
The repeater is not connecting; what should I do?
First, ensure the repeater is within range of your router and the router is broadcasting. Check that you entered the correct WiFi password. Try moving the repeater closer to the router temporarily. If using WPS, verify your router supports it. If the issue persists, reset the repeater to factory defaults and re-run the setup using the web interface.
Is the repeater compatible with 5GHz networks?
No, the Atlona AT-OME-EX-TX only supports the 2.4GHz band (802.11 b/g/n). It cannot connect to or extend 5GHz networks. If your router has a dual-band configuration, ensure the 2.4GHz network is enabled and use that for the repeater.
How do I secure my network when using the repeater?
After setup, log into the repeater's web interface and change the default admin password. Enable encryption (WPA2 is recommended) and set a strong WiFi password. You can also enable MAC address filtering to restrict which devices can connect to the extended network.
User questions about AT-OME-EX-TX Atlona
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your WiFi Repeater in PDF format for free! Find your manual AT-OME-EX-TX - Atlona and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. AT-OME-EX-TX by Atlona.
USER MANUAL AT-OME-EX-TX Atlona
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Atlona
Model : AT-OME-EX-TX
Category : WiFi Repeater