SubStage SWRA411 - Subwoofer KICKER - Free user manual and instructions
Find the device manual for free SubStage SWRA411 KICKER in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Subwoofer |
| Brand | KICKER |
| Model | SubStage SWRA411 |
| Size | 10 inches |
| Impedance | 4 ohms |
| RMS Power Handling | 300 Watts |
| Peak Power Handling | 600 Watts |
| Sensitivity | 87 dB (1W/1m) |
| Frequency Response | 30 Hz - 500 Hz |
| Recommended Sealed Enclosure Volume | 1.0 cubic feet |
| Recommended Ported Enclosure Volume | 1.25 cubic feet |
| Mounting Depth | 5.25 inches (133 mm) |
| Cutout Diameter | 9.25 inches (235 mm) |
| Overall Diameter | 10.6 inches (269 mm) |
| Weight | 12.5 lbs (5.7 kg) |
| Cone Material | Injected Polypropylene |
| Surround Material | Foam |
| Voice Coil | Single 4-ohm |
| Magnet | Ferrite |
| Maintenance | Wipe with a dry cloth; avoid moisture. |
| Safety | Disconnect power before wiring; handle with care. |
| Spare Parts | Not applicable; replace unit if defective. |
| Reparability | Professional service recommended; non-user-serviceable. |
Frequently Asked Questions - SubStage SWRA411 KICKER
What is the impedance of the KICKER SubStage SWRA411?
The impedance is 4 ohms.
Can I wire this subwoofer to a 2-ohm load?
No, it has a single 4-ohm voice coil, so it can only be wired to 4 ohms.
What size enclosure does this subwoofer need?
Recommended sealed enclosure: 1.0 cu. ft.; ported: 1.25 cu. ft..
What is the RMS power handling?
The RMS power handling is 300 Watts.
What is the mounting depth?
Mounting depth is 5.25 inches (133 mm).
How do I clean this subwoofer?
Wipe the cone and surround with a dry cloth. Avoid moisture and cleaners.
Can I use this subwoofer in a ported box?
Yes, recommended ported volume is 1.25 cu. ft. with a tuning frequency of around 35 Hz.
What is the cutout diameter?
Cutout diameter is 9.25 inches (235 mm).
Is the SubStage SWRA411 compatible with 2-ohm amplifiers?
It can be used with a 2-ohm stable amplifier only if the amp is bridged or the sub is wired in parallel? Actually, because it's single 4-ohm, it presents a 4-ohm load to the amp. Ensure your amp is stable at 4 ohms.
What type of music is this subwoofer best for?
It reproduces deep bass well, suitable for rock, hip-hop, and electronic music.
User questions about SubStage SWRA411 KICKER
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Subwoofer in PDF format for free! Find your manual SubStage SWRA411 - KICKER and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. SubStage SWRA411 by KICKER.
USER MANUAL SubStage SWRA411 KICKER
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : KICKER
Model : SubStage SWRA411
Category : Subwoofer